Screw the new lter into the dedicated slot in the water tank, using the integrated tool at the end
of the measuring spoon (g. 4).
Attention: Do not overtighten or bend the lter.
Fill the tank with fresh water and insert it back into the appliance.
Place a sufciently large bowl (at least 0.5 l) underneath the spout (g. 1/E) and press the rotary
control or touch CONTINUE.
The system is being rinsed. The display shows “FILTER RINSES”.
Wait a short while until no more water is dispersed from the spout.
The system reheats. The appliance is ready for use again. The display shows the main menu.
Attention: The lter needs changing after a maximum of two months if the appliance is not in regular
use. The display will show no status message. Use the dial (by the month) at the top of the lter to
select the date of change.
5.9. Maintenance status
The appliance will indicate if cleaning or descaling is imminent.
Turn the rotary control to “MAINTENANCE” and press it.
Turn the rotary control to “MAINTENANCE STATUS” and press it.
The display shows:
“CLEANING SYSTEM”
“CLEANING LATER”
“DESCALING”
“CHANGE FILTER”
The respective bar will show you if cleaning or descaling is imminent. The further to the right it pro-
gresses, the sooner one or both need to be done.
Press the rotary control to exit “MAINTENANCE STATUS”.
Attention: Please clean and descale regularly, at the latest when the display asks you to! Otherwise your
warranty could be compromised.
6. System reports
Fault Cause Solution
Fill system Rell pipe system Press rotary control
Filter possibly defect Remove or replace lter
Fill water Water tank is empty Fill water tank
Water tank not inserted or
inserted incorrectly
Insert water tank correctly
(see 2.3.)
Fill beans No beans Fill beans
(see 2.3.)
Beans stuck in container Stir beans with a spoon
Clean bean container with
a cloth
Note: The display ”FILL BEANS” will only turn off after the next coffee request!
Empty trays Drip tray and/or used coffee
container are full
Empty drip tray and/or used
coffee container
Contacts are damp Clean and dry contacts.
No trays No drip tray with used
coffee container or incorrectly
inserted
Reinsert drip tray with used
coffee container
Contacts are damp Clean and dry contacts
Cleaning necessary System cleaning necessary Clean system
(see 5.4.)
Descaling necessary System descaling necessary Descale system
(see 5.5.)
Change lter Filter exhausted Change lter
(see 5.8.)
Brew unit removed Brew unit tted incorrectly Fit brew unit correctly und
snap into place
(see 5.7.)
98 99
5. Cleaning and maintenance 6. System reports
