Bedienungsanleitung Nivona CafeRomatica 660 (Seite 18 von 37) (Englisch)

717594

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

➔ Turn the rotary to the beverage of your choice (i.e. Espresso).

Information The display shows the current setting of the selected coffee specialities in the lower row.

The strength is shown on the left, the ﬂavour proﬁle in the middle and the amount on the right.

Information Take into consideration whether you prepare one or two cups and place the cups under

the outlet respectively (picture 5 and 6).

➔ Press the rotary for the beverage preparation.

The cup lighting is switched on (only designs 670 and 680). The appliance is preparing a cup of the

selected beverage in the standard setting.

Preparation of two cups

Information: 2 cups can be prepared simultaneously with beverages without milk and without hot water

only. With Cappuccino and Cafe Americano, several beverages can only be prepared one after another

and not at the same time.

➔ To prepare two cups directly one after another, press the rotary once again immediately after the

start.

➔ If you would like to cancel the preparation, press the rotary once again.

The display shows “CANCELLED’’. The appliance cancels the supply and returns to the main menu.

You can change the standard setting in two ways as follows:

4.2.1. Live programming for Espresso and coffee (designs 670 and 680 only)

You can change and save the standard setting during the preparation as follows.

➔ Choose the menu option “SETTINGS’’ in the main menu by turning the rotary and then pressing

the rotary.

➔ Turn the rotary to “BEVERAGES RECIPES’’. Press the rotary.

➔ Turn the rotary to the beverage of your choice. “ESPRESSO’’). Press the rotary.

➔ Turn the rotary to “LIVE PROGRAMMING’’.

➔ Place a cup or a glass underneath the outlet (picture 5).

Information: Should you wish to cancel the Live programming after the start, hold the rotary down for

longer than three seconds.

➔ To change the standard setting press the rotary now.

The display shows “SELECT STRENGTH’’.The display shows “SELECT STRENGTH’’.

➔ Turn the rotary to select the strength of your choice (weaker to the left and stronger to the right).

➔ Press the rotary to conﬁrm the choice of your strength.

The display shows “SELECT FLAVOUR’’.

➔ Turn the rotary to set the ﬂavour proﬁle of your choice (for the explanation of the ﬂavour proﬁles

see point 3.3).

➔ Press the rotary to conﬁrm your choice of ﬂavour.

The display shows “PLEASE WAIT’’. The device is grinding, heating and will then start with the

preparation.

The display shows “STOP COFFEE?’’

➔ Press the rotary when the desired amount of coffee is prepared.

The standard setting for the beverage of your choice (i.e. Espresso) is now changed and saved. The

display shows “RECIPE CREATED’’ for a short amount of time and returns to the main menu with the

new standard settings.

• 

4. Prepare coffee specialities

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nivona CafeRomatica 660 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nivona CafeRomatica 660

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info