Bedienungsanleitung Nivona CafeRomatica 680 (Seite 10 von 37) (Englisch)

717592

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Warning: Do not use beans which were treated with additives like sugar or similar products during or

after the roasting process. This may cause damages to the grinder. The resulting repair costs are not

covered by the guarantee.

2.4. Turn on the appliance and ll the system

➔ Turn the appliance on with the On/Off switch (picture 1/H).

Please set the following basic setting prior to preparing your ﬁrst coffee:

Set a language

➔ Turn the rotary to set your language.

➔ Press the rotary to conﬁrm your setting.

The display shows “INSERT FILTER?’’.

2.4.1. Operate appliance with lter

The scope of supply includes a Claris ﬁlter. When using the ﬁlter, descaling your appliance becomes

less often as the ﬁlter softens the water.

➔ Turn the rotary to ‘YES’ and press the rotary so that the appliance recognises that a new ﬁlter has

been inserted.

➔ The display shows “INSERT FILTER’’.

➔ Empty the water tank (picture 1/F and 2) and carefully screw the ﬁlter with the installation aid at

the back of the measuring spoon (picture 4) into the corresponding mounting in the water tank.

Warning: Do not overwind or bend.

➔ Fill the tank with fresh water above the minimum mark (0,5 l) and insert it back into the appliance.

➔ Close the cover on the left side of the device again.

➔ Place a big enough container (at least 0,5 l) underneath the water outlet (picture 1/P) and open

the steam- hot water- rotary knob clockwise.

The system is now being rinsed. The display shows “FILTER RINSING’’.

➔ Wait until no water is coming out of the outlet after some time. Then, close the steam- hot water-

rotary knob anticlockwise.

The display shows “PLEASE RINSE’’.

➔ Press the rotary.

The display shows “SYSTEM RINSING’’.

When the appliance is heated, the display shows the main menu with the beverage symbols as a sign

of the appliance being ready for its use.

At the rst preparation: If you are preparing coffee for the ﬁrst time, the grinding chamber is still empty.

It is possible that the appliance is not preparing any coffee and that the display is showing “FILL

BEANS’’ after the ﬁrst grinding process.

➔ Follow the notes on the display and, in this case, press the rotary once again.

The process is being repeated.

Information: If you use the appliance with lter and have programmed the system to “INSERT FILTER’’

“YES’’, the possibility to adjust the water hardness is cancelled. Internally, the water hardness is set

on level 1 automatically! Then, you have to descale your appliance less often - but always on request

and always with REMOVED FILTER.

After the supply of approximately 50 l of water, the effect of the ﬁlter is exhausted (Change ﬁlter see

point 3.1).

• 

2. Set up

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nivona CafeRomatica 680 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nivona CafeRomatica 680

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info