Warranty and customer service conditions
Please read the detailed warranty and customer service conditions provided on the accompanying
information sheet.
Filter cartridges may be disposed of in your ordinary household waste.
Disposing of equipment and packaging
Please keep the packaging in which your machine was delivered. This packaging offers maximum
protection, in the event of your having to return the machine to us.
Electrical and electronic equipment may contain valuable and/or environmentally-harmful materials
and should not be disposed of as ordinary household waste. Inappropriate disposal may be harm-
ful to human health and cause damage to the environment. Never attempt to dispose of defective
equipment as ordinary household waste. Your local community will have special facilities for the safe
disposal of electrical and electronic equipment.
Further information on safe disposal can be obtained from your local authority, local waste manage-
ment operator or the dealer from which you purchased your machine.
10. Technical specications
Voltage 220 - 240V AC, 50/60 Hz
Power consumption: 1455 W
NIVONA Apparate GmbH
Südwestpark 90
90449 Nürnberg, Germany
www.nivona.com
© 2012 by NIVONA
8. Replacement parts and accessories
Freshwater lter NIRF 700:
New freshwater lters can be purchased from any well-stocked specialist retailer or can be ordered
from our central Customer Services Department.
Cleaning tablets NIRT 700:
Supplies of cleaning tablets can be purchased from any well-stocked specialist retailer or can be
ordered from our central Customer Services Department.
Descaling agent NIRK 703:
Descaling agent can be purchased from any well-stocked specialist retailer or can be ordered from
our central Customer Services Department.
Special milk residue remover NICC 705:
A milk residue remover specially adapted for cleaning your frothing device can be purchased from any
well-stocked specialist retailer or can be ordered from our central Customer Services Department.
Milk cooler NICT 500
This is a quality stainless steel cooler designed to keep milk at the temperature and conditions best
suited for frothing.
9. Customer service, warranty, environmental protection
Customer Services
NIVONA products are manufactured to the highest quality standards. Should you have any problems
when using your machine, please contact us. We need your help to ensure that our products are
continually developed and improved to meet your requirements.
In the event of your having to return a faulty machine to us, please proceed as follows to ensure that
no water remains in the system:
£ Turn the Right rotary knob to “Setting”. Now press the Right rotary knob.
£ Turn the Right rotary knob to “Care”. Now press the Right rotary knob.
£ Turn the Right rotary knob to “Care Evaporation”. Now press the Right rotary knob.
The machine will rinse out the system. The messages “Hose to spout” and “and into drip tray” will toggle
alternately on your display.
£ Connect the hose to the vertically-adjustable spout (Fig 7).
£ Put the free end of the hose into the hole at the back of the drip tray on the right (Fig 10).
£ Place a sufciently large vessel (with a capacity of at least 0.5 litres) under the spout.
£ Now press the Right rotary knob.
“Frother is rinsing” now appears on the display. Your machine will now begin the automatic rinsing
process. The rinsing process takes approx. 20 seconds.
Once the rinsing cycle is over, the “Remove tank” message appears on the display.
£ Remove the water container.
The machine will now steam itself out. The “Please Wait” message will appear on the display. After
steaming out, the machine will automatically switch off.
£ Remove the drip and used coffee trays (Figs 1/N and 1/O) and empty them.
£ Replace the water container, drip and used coffee trays.
Your machine is now ready for despatch.
Important note: Please pack the machine carefully and if possible in its original packaging. We cannot
accept any liability for damage incurred during transportation.
38 39
8. Replacement parts and accessories / 9. Customer service, warranty, ... 9. Customer service, warranty, ... / 10. Technical specications
