Bedienungsanleitung Nivona CafeRomatica 825 (Seite 11 von 32) (Englisch)

717589

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Tip: If the test strip does not show any red dots, please set up level 1.

How to set up the water hardness:

➔ Turn the rotary control onto the correct degree of hardness.

➔ Press the rotary control to conrm.

The display shows “NIVONA”.

The display shows “PLEASE RINSE”.

➔ Press the rotary control. The display shows “SYSTEM IS CLEANING”.

The system is now being lled with water and heated up.

Once the appliance is ready for use the main menu is shown on the display.

The rst cup: When you prepare your rst cup of coffee the grinder will be empty. It is possible that

after the initial grinding the display will show “REFILL BEANS”, and no coffee is produced.

➔ Follow the display and press the rotary control again.

The process will then be repeated.

2.5. Switching the appliance on during operation

When you have started the appliance for the rst time (g. 2.4), proceed as follows for all other start-ups:

➔ Switch the appliance on using the on/off switch (g. 1/H).

The display shows “NIVONA, SYSTEM IS HEATING UP”.

Once production temperature has been reached, the display shows “PLEASE RINSE”.

➔ Press the rotary control.

The system is now being rinsed. Afterwards the appliance is operational. The display shows the main

menu (g. 1/A).

Tip: If you do not use the appliance for a prolonged period of time (e.g. holidays), switch it off using

the on/off switch (g. 1/J) and pull the mains plug.

Tip: The machine has a pre-programmed setting ex-factory for each coffee variety. This means that

you can brew your rst coffee straightaway (see chapter 4.). However, we do recommend making the

necessary adjustments according to your preferences before you do so (see chapter 3.)

2.6. Pre-heating cups (model 825)

our appliance comes with a function for pre-heating cups.

➔ Pressing the button (g.1/K) activates the cup heating. To do this the on/off switch needs to be

switched on (g. 1/H).

The display shows “CUP HEATING ON”.

➔ By pressing the button again (g. 1/K) the cup heater is switched off.

The display shows “CUP HEATING OFF”.

Tip: Pre-heat the cups according to your personal preference to optimize aroma and temperature.

Note: If AUTO ON is switched on and you want the cup heating to start automatically, please also set

the cup heating on AUTO ON (see 3.6.).

2.7. ECO mode

If neither rotary control nor any button is used for a longer period of time, the appliance automati-

cally switches into ECO mode. The display shows “SAVING ENERGY”.

➔ By using the rotary control or any button, the appliance switches back into standard mode.

The display shows the main menu.



2. Initial start-up

04_Niv_8xx_BDA_sw_GB_03.indd 71 13.04.17 15:42

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nivona CafeRomatica 825 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nivona CafeRomatica 825

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info