The water tank should be rinsed with clear water daily and relled with fresh, cool water.
Warning: Dried milk residues are hard to remove. Therefore, please clean everything properly after
cooling! Always follow the “RINSE FROTHER” instruction given on the display.
Therefore, clean the milk frother, tube and outlet regularly.
Information: From time to time (ideally prior to a longer break between preparing beverages, but de-
nitely regularly!), the milk frother must be completely dismantled into its individual parts and rinsed
under clear water.
Remove the cover plate (gure 1/P) under the height-adjustable outlet.
Pull the milk frother down to remove it (a) and dismantle it into its individual parts (gure 1/R).
Clean the individual parts (gure 1/R) thoroughly and assemble the milk frother again.
Push the assembled milk frother back up (b) into the height-adjustable outlet.
Place the cover plate back on the height-adjustable outlet (gure 1/P).
Information: Your appliance is tted with rear wheels (gure 1/Q). These allow it to be moved on a
level surface. This also allows you to clean under the appliance.
5.8. Change lter
The lter is no longer effective once approximately 50 l of water has owed through it. The display
shows “PLEASE REPLACE FILTER”.
Information: You can still prepare beverages. However, we recommend you always change the lter
immediately.
Turn the rotary to select the settings symbol (gure 1/C) in the main menu and then press the
rotary or tap on the settings symbol.
Turn the rotary to “FILTER” and then press the rotary or tap on “FILTER”.
Turn the rotary to ‘’INSERT FILTER? YES” so that the appliance recognises that the lter is
inserted.
Empty the water tank (gure 1/F) and carefully unscrew the old lter from the mounting in the
water tank using the installation aid on the end of the measuring spoon (gure 13).
Dispose of the old lter in your household waste.
Press the rotary.
Carefully screw the new lter into the mounting provided in the water tank using the installation
aid on the end of the measuring spoon (gure 13).
Warning: Do not overtighten or bend the lter.
Fill the tank with fresh water and insert it back into the appliance.
Place a sufciently large container (at least 0.5 l) under the outlet (gure 1/E) and press the rotary.
The system will now be rinsed. The display shows “FILTER RINSES”.
Wait a few moments until no more water comes out of the outlet.
The system will heat up. The appliance is now ready to operate. The main beverages menu will
appear in the display.
Warning: In the event of low water usage, you must change the lter after no more than two months.
Then a notication will not appear in the display. You can set the replacement date using the rotary
disk at the head of the lter (month display).
5.9. Maintenance status
Your appliance can show you whether a cleaning or descaling process is imminent.
Turn the rotary to select the settings symbol (gure 1/C) in the main menu and then press the
rotary or tap on the settings symbol.
Turn the rotary to “STATUS OF MAINTENANCE” and then press the rotary or tap on “STATUS OF
MAINTENANCE”.
The display shows:
“CLEAN SYSTEM”
“CLEAN FROTHER”
“DESCALING”
“REPLACE FILTER”
The respective progress bar shows you whether a cleaning or descaling process is imminent. The
further right the progress bar is, the sooner cleaning or descaling is required.
Press the rotary to exit “STATUS OF MAINTENANCE”.
Warning: Please carry out cleaning and descaling regularly and no later than when the display
prompts you to do so. Otherwise, claims under the guarantee may not be accepted.
6. System notications
Notication Meaning Solution
Fill the system Fill water pipe system Press rotary
Filter may be faulty Remove or change lter
Fill with water Water tank is empty Fill water tank
Water tank is missing or
inserted incorrectly
Insert water tank correctly
Rell beans There are no beans Fill coffee beans
Beans in container are stuck
together
Stir beans in container with
a spoon
Clean bean container with
a cloth
Information: The message “REFILL BEANS” only disappears after coffee has been prepared again.
Empty trays Drip pan and/or used coffee
tray are full
Empty drip pan and/or used
coffee tray
Trays missing Drip pan with used coffee
tray is missing or inserted
incorrectly
Insert drip pan with used
coffee tray
Cleaning required System needs to be cleaned Clean system
(section 5.4.)
Descaling required System needs to be descaled Descale system
(section 5.6.)
Change lter Filter exhausted Change lter
(section 5.8.)
Brewing unit removed Brewing unit inserted
incorrectly
Insert and lock brewing unit
correctly
(section 5.5.)
86 87
5. Cleaning and maintenance 5. Cleaning and maintenance / 6. System notications
