Bedienungsanleitung Nivona NICR670 (Seite 9 von 38) (Englisch)

774464

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Information: The appliance should be posted in its complete original packaging in case of a customer

support service. Please keep the packaging including the polystyrene parts in full.

➔Put the appliance onto an even, dry and appropriate work surface.

➔Connect it to a professionally installed socket.

➔Your appliance has a cable compartment - you can push the cable length which is not required

into the compartment on the back, should the lead be too long (picture 1/T).

2.2. The most important control elements

Your NIVONA appliance offers you diverse possibilities to prepare speciality coffees to your individual

wishes. The most important control elements and their basic function are mostly identical for the

different coffee specialities:

• On/Off switch (picture 1/H): By pressing you turn the appliance on, by pressing once more you

turn it off again.

• Rotary - Turn -Press - Selector (short Rotary) (picture 1/B): Select your favourite beverage in the main

menu by turning the rotary. By pressing the rotary in the main menu, the beverage preparation

starts. During the preparation of the beverage, you can alter the strength and amount of your

coffee with the rotary. The changeable value ashes respectively.

• Steam-Hot water-Rotary knob (picture 1/C): When the display shows “OPEN VENT’’, place a container

underneath the steam-hot water jet / the spumatore prior to use. You open the vent for the hot

water or steam supply, by turning it clockwise up to the stop. You stop the supply, by turning it

anticlockwise up to the stop.

• Steam-Hot water Jet/Spumatore (picture 1/P): Is the tap of the spumatore upright with open steam-hot

water rotary knob (picture 1/C), foamed milk or hot water are made depending on the choice of

beverage. The milk tube is rinsed, when the tap of the spumatore is horizontal with open steam-hot

water rotary knob (picture 1/C).

• Height-adjustable spout (picture 1/E): By moving up or down, you adjust the spout to the height

of your cups or glasses. Grab the spout between thumb and index nger and move it up or down

(picture 11).

• Milk container (only designs 670 and 680): Fill the milk container with fresh, cold, low fat milk.

Close the lid of the milk container and connect the suction tube with one end to the milk container

and with the other end to the milk frother/spumatore.

2.3. Filling of water and beans

➔Open the cover on the left side of the device (picture 1/F) and remove the water tank (picture 2).

Rinse it with cold, clear tab water.

➔Fill the water tank above the minimal mark (0,5 l) and put it back into the appliance. Ensure that

the water tank ts properly when inserting it.

➔Close the cover on the left side of the device again.

Warning: Always ll the water tank with clear, cold water only! Never use carbonated water or different

uids! Nonobservance will void you guarantee claims.

➔Open the lid of the bean container (picture 1/G and 3).

➔Fill it with untreated, roasted coffee beans only.

➔Close the lid again. Ensure the proper t.



2. Set up

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nivona NICR670 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nivona NICR670

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info