Bedienungsanleitung Nivona NICR670 (Seite 13 von 38) (Englisch)

774464

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

➔You conrm the chosen setting by pressing the rotary.

➔By choosing “EXIT’’ and then pressing the rotary, you get to the next menu level above: From the

chosen setting via the menu “SETTINGS’’ to the main menu.

3.1. Set the operation with or without lter

➔To change the operation to with or without lter, chose the menu option “SETTINGS’’ in the main

menu by turning the rotary and then press the rotary.

➔Chose the option “FILTER’’ in “SETTTINGS’’ by turning the rotary.

Operate the appliance with lter: Please follow the procedure under point 2.4.1.

Operate the appliance without lter: Please follow the procedure under point 2.4.2

➔You can carry on directly with the programming of further setting from this position or you can

leave the setting with choosing “EXIT’’ and then pressing the rotary.

3.2. Set water hardness

➔To change the water hardness, choose the menu option “SETTINGS’’ in the main menu by turning

the rotary and then press the rotary.

➔Choose the option “WATER HARDNESS’’ in “SETTINGS’’ by turning the rotary.

Please follow the procedure in point 2.4.3 afterwards.

➔You can carry on directly with the programming of further setting from this position or you can

leave the setting with choosing “EXIT’’ and then pressing the rotary.

3.3. Choose the avour

Depending on your wish, you can choose the avour. Thus, you can change the avour of your coffee

as desired. For this, there are three proles for the ow velocity of the water through the coffee

grounds on le under option “FLAVOUR’’. Prole 1 “DYNAMIC’’ ensures a dynamic ow, Prole 2

“CONSTANT’’ a constant ow and Prole 3 “INTENSE’’ ensures a intensive ow. The factory setting is

“INDIVIDUAL’’, viz. you can change your avour setting individually for each coffee recipe. However,

should you choose a Flavour Prole 1, 2 or 3 at this point, it will apply for all coffee specialities.

Tip: Test your favourite avour prole on one of the beverages.

➔To change the avour setting, choose the menu option “SETTTINGS’’ in the main menu by turning

the rotary and then press the rotary.

➔Turn the rotary to “FLAVOUR’’. Press the rotary.

➔Turn the rotary to the avour prole of your choice.

➔Press the rotary to conrm your setting.

➔You can carry on directly with the programming of further setting from this position or you can

leave the setting with choosing “EXIT’’ and then pressing the rotary.

3.4. Set temperature

You can set the temperature for coffee, mild and hot water to

“NORMAL”, “HIGH”, “MAXIMUM” or “INDIVIDUAL” as desired. The factory setting is “HIGH’’.

When you have set the temperature as described below, it will apply for all coffee specialities.

However, you can set the temperature to “INDIVIDUAL’’ for each coffee speciality (see point 4

below). Then, choose the setting “INDIVIDUAL’’ in this menu as follows:



3. Take/change basic settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nivona NICR670 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nivona NICR670

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info