Bedienungsanleitung Nivona NICR675 (Seite 20 von 38) (Englisch)

774465

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

You can prepare milk directly from the pack or from a different container with the special milk frother

and ll directly into the cup or into the glass.

➔Connect the suction tube to the milk frother (picture 10).

➔Connect the other end of the suction tube to the milk container (designs 670 and 680 only)

(picture8) or submerge it directly into the milk carton or into a different container.

Warning: Ensure that the tap of the spumatore is upright. This is how the frothed up milk is created.

➔Turn the rotary to “CAPPUCCINO’’.

Information: The display shows the current settings in the lower row. The strength is shown on the left,

the avour prole in the middle and the amount of milk froth on the right.

➔Press the rotary.

The display shows “PLEASE PLACE CUP UNDERNEATH THE MILK FROTHER’’. Simultaneously the

device is grinding the coffee already.

➔Place the cup underneath the milk forther (picture 1/P)

Information: By ashing of the strength in the lower row of the display it is shown that you can now

change this parameter by turning the rotary.

➔While the bean symbol is ashing for the strength, turn the rotary to adjust the strength.

Clockwise stronger and anticlockwise weaker.

The appliance is heating. Then, the display shows “OPEN VENT’’.

➔Turn the steam-hot water- rotary knob (picture 1/C) clockwise up to the stop.

Information: The display shows the current settings in the lower row. The strength is shown on the left,

the avour prole in the middle and the amount of milk froth on the right.

Information: By ashing of the amount of milk froth in the lower row of the display it is shown that you

can now change this parameter.

➔While the ml-display for the milk froth is ashing, turn the rotary to change the amount of milk

froth. Clockwise stronger and anticlockwise weaker.

As soon as the desired amount of milk froth is prepared, the display shows “CLOSE VENT’’.

➔Turn the steam-hot water - rotary knob (picture 1/C) anticlockwise to the 0-setting.

“Please turn the Steam/Hot Water Tap (Illustration 1/C) clockwise to the Zero Position at the latest,

when enough milk has been drawn.”

The display shows “PLEASE PLACE CUP UNDERNEATH COFFEE OUTLET’’.

➔Now, place a cup or a glass underneath the coffee outlet (picture 5).

Information: By ashing of the amount of coffee in the lower row of the display it is shown that you can

now change this parameter.

➔While the ml-display is ashing for the amount, turn the rotary to adjust the amount. Clockwise

stronger and anticlockwise weaker.

You can change the standard setting in two ways as follows:

4.3.1. Live programming for Cappuccino and milk froth ( designs 670, 675 and 680 only)

You can change and save the standard setting during the preparation as follows.

➔Choose the menu option “SETTINGS’’ in the main menu by turning the rotary and then pressing

the rotary.

18 

4. Prepare coffee specialities

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nivona NICR675 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nivona NICR675

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info