Bedienungsanleitung Nivona NICR675 (Seite 31 von 38) (Englisch)

774465

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

➔Only now, add the descaler.

The display shows “START DESCALING’’ and “OPEN VENT’’ in alteration.

➔Place a big enough container (at least 0,5 l) centrally underneath the milk frother (picture 1/P).

Information: Ensure that the tap of the spumatore is horizontal in the rinse setting.

➔Turn the steam-hot water- rotary knob (picture 1/C) clockwise up to the stop.

The appliance starts the descaling process. The display shows “SYSTEM IS DESCALING’’. The

descaling is running automatically. The descaler solution is now running through the milk frother

inintervals.

If the descaling of the milk frother is nished, the display shows “CLOSE VENT’’.

➔Place a big enough container (at least 0,5 l) centrally underneath the milk frother (picture 1/P).

➔Turn the steam-hot water- rotary knob (picture 1/C) clockwise up to the stop.

The appliance starts the descaling process. The display shows “SYSTEM IS DESCALING’’. The

descaling is running automatically. The descaler solution is now running through internal system

inintervals.

The descaling is nished,if the display shows “EMPTY BOWLS”,

’’FILL WATER TANK” and ‘INSERT FILTER” in alteration.

➔Remove the drip pan and the used coffee tray (picture 1/N and 1/O) and empty both of them.

➔Insert drip pan and used coffee tray again.

➔Remove the water tank. Rinse the water tank with clear water.

➔If necessary, insert the lter into the water tank again.

➔Fill the water tank with fresh water and insert it again.

➔Place a big enough container (at least 0,5 l) centrally underneath the milk frother (picture 1/P).

The display shows “PLEASE RINSE’’ and “OPEN VENT’’ in alteration.

➔Turn the steam-hot water- rotary knob (picture 1/C) clockwise up to the stop to start the rinsing

process.

The display shows “SYSTEM RINSING’’. The rinsing cycle starts and runs automatically. As soon as

the rinsing cycle for the milk frother is nished, the display shows “CLOSE VENT’’.

➔Place a big enough container (at least 0,5 l) centrally underneath the milk frother (picture 1/P).

➔Turn the steam-hot water- rotary knob (picture 1/C) clockwise up to the stop.

The display shows “SYSTEM RINSING’’. The rinsing cycle inside runs automatically.

Information: If the descaling process was interrupted, the display shows

’’EMPTY BOWLS” and “CHANGE WATER” in alteration.

➔Empty the drip pan and the used coffee tray (picture 1/N and 1/O) and insert both again after

cleaning them.

➔Fill the water tank with fresh water and insert it again.

➔If necessary, insert the lter into the water tank again.

The appliance heats up and is then ready to operate again. The display shows the main menu.

Warning: Finally, please absolutely ensure to remove residue of the descaling uid on the case with

adamp cloth.

5.6. Regularly clean by hand

Information: Please follow these cleaning information. Because especially while handling food

absolute cleanliness is necessary.

Warning: Never submerge the appliance into water! Do not use any scouring agent for the cleaning.



5. Cleaning and care

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nivona NICR675 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nivona NICR675

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info