12
INSTALLATION
POWERING OFF THE PROJECTOR
Press the “Power/Standby” button to turn off the projector lamp. The projector will
display the message “Power off the lamp?”
Press the “Power/Standby” button again to confirm. Otherwise the message will
disappear after 5 seconds.
“Power/Standby” indicator will turn green for approximatly 90 seconds. When the
green light begins flashing, the projector has entered standby mode.
If you wish to turn the projector back on, you must wait until the projector has
completed the 90 secs cooling cycle and has entered standby mode. Once in
standby mode, simply press the “Power/Standby” button to restart the projector
Disconnect the power cord from the electrical outlet and the projector.
Do not turn on the projector immediately following a power off procedure.
1
2
3
4
5
If the “TEMP” indicator turns red it indicates the
projector has overheated. The projector will
display “Over Temperature. After a short
period the“Power/Standby” indicator will turn
green and the projector will automatically shut
itself down.
If this occurs please contact your
local reseller or service center.
If the “LAMP” indicator turns red and the “Power/Standby” indicator turns
amber the projector will automatically shut itself down. If this occurs please
contact your local reseller or service center.
If the “TEMP” indicator begins flashing the projector
will display “Fan Fail” warning. After a short period
the “Power/Standby” indicator will flash green for
about 90 seconds and the projector will
automatically shut itself down.
If this occurs
please contact your local reseller or service center.
