Check to make sure your unit is complete. Contact your dealer
immediately if anything is missing.
S18E DLP
™
Projector
Quick Start Guide
1 Remove the lens cap
2
Ensure that the power cord and signal cable are
secur
ely connected. The Power LED will flash green
3 Turn on the lamp by pressing “Power/Standby”
button on the control panel. And the Power LED
will turn green.
The first time you use the projector, you can select
your prefered language from quick menu after the
star
tup screen display.
4
Turn on your source (computer, notebook, video
player
, etc.).
The projector will detect your source automatically.
C
ONNECTING THE
P
ROJECTOR
P
OWERING ON THE
P
ROJECTOR
1 Make sure the projector and your computer are
turned off.
2 Connect one end of the projector signal cable to
the projector; connect the other end to the VGA
port on the computer and tighten the screws.
3 Connect the projector to other video sources.
4
Connect one end of the power cord into the side
of pr
ojector; connect the other end to an
electrical outlet.
5 T
urn on the projector first and then the computer.
P
OWERING
OFF THE
P
ROJECTOR
Pr
ess the “Power/Standby” button to tur
n off the
pr
ojector lamp, you will see a message
“Power off the
lamp? Pictur
e Mute” displayed on
the projector’s
scr
een. Pr
ess the “Power/Standby” button again
to confir
m, otherwise the message will disappear
after 5 seconds.
Please note that if the
key is pressed instead,
the pr
ojector will enter the “Picture Mute” mode
and no image will be displayed. T
o exit the
“Pictur
e Mute” mode, press the “Power/Standby”
button again.
1
2
3
4
5
6
V
ideo
Output
S-Video Output
3367 S18E
QSG UK
Power Cord
VGA Cable
Composite V
ideo Cable
SCART RGB Adaptor
(For European Use Only)
Audio Cable Jack/Jack
S-V
ideo Cable
(Optional Accessor
y)
D-Sub to RCA Cable for HDTV/Component
(Optional Accessory)
RS232 Cable (Optional Accessory)
8
7
6
5
4
3
2
1
DVD Player,
Settop Box,
HDTV receiver
RS232
7
8
USB
RGB