Bedienungsanleitung Nokia 6500D (Seite 18 von 46) (Englisch)

774482

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

standby mode and the screen is o.

7. Tuner mode

Note: If you don’t want to perform a tuner scan, select one of the available options anyway. You can skip the

scan at some later stage of the installation wizard. If you skip this step you can perform a channel search later

using the related Channels menu options.

The next step is the selection of the tuner mode. Select your tuner preference to install channels for Live TV

function. Antenna, Cable and Satellite options are available. Highlight the option that corresponds to your

environment and press OK or Right directional button to proceed.

7.1. Antenna

If Antenna option is selected, the TV will search for digital terrestrial and analogue broadcasts. On the

next screen highlight Scan option and press OK to start the search or select Skip Scan to continue without

performing a search.

7.2. Cable

If Cable option is selected, the TV will search for digital cable and analogue broadcasts. If any, available operator

options will be listed on the Select Operator screen. Otherwise this step will be skipped. You can select only

one operator from the list. Highlight the desired operator and press OK or the Right directional button to

proceed. On the next screen select Scan option to start a search or select Skip Scan to continue without

performing a search. If Scan is selected a conguration screen will be displayed next. Scan Mode, Frequency

(kHz), Modulation, Symbol Rate (kSym/s), Network ID options may need to be set. To perform a full scan set

the Scan Mode as Full/Advance if available. Depending on the selected operator and/or Scan Mode some

options may not be available to be set.

Once you are done with setting available options, press the Right directional button to proceed. The TV will

start to search available broadcasts.

7.3. Satellite

If Satellite option is selected, Satellite Type screen will be displayed next. Preferred Satellite and General

Satellite options will be available. Select one and press OK to proceed.

Note: Preferred Satellite and General Satellite options may not be available depending on the selected country.

In this case the DVBS Conguration Setting screen will be displayed after selecting the tuner mode as Satellite.

If Preferred Satellite option is selected, next screen will be Select Operator screen. You can select only one

operator from the list. Highlight the desired operator and press OK or the Right directional button to proceed.

Some of the following options may be preset depending on the selected operator in this step. Check the

parameters before proceeding and adjust if necessary.

7.4. DVB–S conguration

DVB–S Conguration Setting screen will be displayed next. First Antenna type should be set (This option may

be named as Satellite type depending on the country selection.) Universal, Single Cable and Jess Singlecable

options are available. Set the Antenna Type as Universal for Direct and DiSEqC satellite systems. If you set

the antenna type as Universal, press the Right directional button to proceed to the next step. If the antenna

type is set as Single Cable or Jess Singlecable, there will be three more additional options on the DVB–S

Conguration Setting screen: Tuner, Band frequency and User Dened. User Dened option will be available

if the Band frequency is set as User Dened. Set these options if available and press the Right directional

button to proceed.

Depending on the country and satellite type selections you made in the earlier steps of the initial setup

process, Load Preset List screen may be displayed next. Highlight Load Preset List and press OK or the Right

directional button to proceed with the SatcoDX installation. You can also skip this step by selecting Skip option.

After the parameters on the DVB–S Conguration Setting screen are congured according to your environment

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 6500D Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 6500D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info