Bedienungsanleitung Nokia 6500D (Seite 23 von 46) (Englisch)

774482

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

10.2.1. Channel installation mode – Antenna

• Automatic Channel Search: Start a scan for analogue and digital channels. You can press the Back button to

cancel the scan. The channels that have already been found will be stored in the channel list.

• Update Scan: Search for updates. Previously added channels will not be deleted, but any newly found

channels will be stored in the channel list.

• Analogue Manual Scan: Start a manual scan for analogue channels. Enter the Start Frequency and then

select Scan Up or Scan Down. When a channel is found the scan will be completed and the found channel will

be stored in the channel list.

• Single RF Scan: Select the RF Channel by using the Right/Left directional buttons. Signal Level and Signal

Quality of the selected channel will be shown. Press OK to start scan on the selected RF channel. The found

channels will be stored in the channel list.

• Manual Service Update: Start a service update manually.

• LCN: Set your preference for LCN. LCN is the Logical Channel Number system that organizes available

broadcasts in accordance with a recognizable channel number sequence (if available).

• Channel Scan Type: Set your scan type preference.

• Channel Store Type: Set your store type preference.

• Favourite Network Select: Select your favourite network. This menu option will be active, if more than one

network is available.

• Channel Skip: Set channels to be skipped when switching the channels via Programme +/- buttons on the

remote. Highlight the desired channel/s on the list and press OK to select/unselect.

• Channel Swap: Replace the positions of the two selected channels in the channel list. Highlight the

desired channels on the list and press OK to select. When the second channel is selected, the

position of this channel will be replaced with the position of the rst selected channel. You should set the

LCN option to O or Default in order to enable this feature.

• Channel Move: Move a channel to the position of another channel. Highlight the channel you want to move

and press OK to select. Then do the same for a second channel. When the second channel is selected, the

rst selected channel will be moved to the position of that channel. You should set the LCN option to O or

Default in order to enable this feature.

• Channel Edit: Edit channels in the channel list. Edit the name and channel number of the

selected channel and display Network Name, Frequency, Colour System and Sound System information

related to that channel if available. Depending on the channel other options may also be editable. You can

press the Blue button to delete the highlighted channel.

• Analogue Channel Fine-tune: Fine-tune an analogue channel. A list of available analogue channels will

be displayed. Select the desired one from the list and press OK button. Then change the frequency of the

channel by pressing Left/Right directional buttons. Press OK to store the new frequency for that channel.

Press Back to cancel. This item may not be visible, depending on whether or not the last watched channel

was analogue.

• Clear Channel List: Delete all channels stored in the channel list of the selected channel installation mode.

A dialogue will be displayed for conrmation. Highlight OK and press OK button to proceed. Highlight Cancel

and press OK to cancel.

10.2.2. Channel installation mode – Cable

• Automatic Channel search: The Smart TV searches for digital and analog channels that can be received via

cable. Depending on the country, optional DVB-C cable TV providers are oered during the initial installation

and are listed on the Select operator screen. If you receive the DVB-C signal from a non-dedicated cable TV

provider, select the option Other. Press OK to start the channel search. In the Channel Search menu, you

can select one of the three channel search options: Full, Advanced, or Quick.

• Full: Automatic search of all available DVB-C channels.

• Advanced: Automatic search of all available DVB-C channels. For this option, it is necessary to enter

the DVB-C provider’s reception parameters, frequency and network ID. With this search option, the

channels are sorted by LCN of the cable providers.

• Quick: Automatic search for all available DVB-C channels. This search will search all available cable

transponders with the standard symbols.

• Single RF Scan: Manual search of DVB-C channels by transponder frequency.

• LCN: LCN options for DVB-C channel search.

• Channel Scan Type: Set your scan type preference.

• Channel Store Type: Set your store type preference.

• Favourite Network Select: Select your favourite network. This menu option will be active, if more than one

network is available. This option may not be available depending on the selected country during the initial

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 6500D Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 6500D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info