Bedienungsanleitung Nokia 7000D (Seite 19 von 46) (Englisch)

774483

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

and preset list installation preference is selected the next step may be Select Satellite screen. You may be

able to set up dierent satellites depending on the selected antenna type and operator in the previous steps.

Highlight the desired satellite option and press OK to set the parameters (If you have a Direct satellite system,

DiSEqC Set option should be set as DiSEqC A.). The Satellite Status of the rst satellite option will be set as

On. In order to congure other settings of the satellite and to enable scan this option should be set as On rst.

Press Back button and select next satellite you want to set. After you completed the conguration changes,

press the Right directional button to proceed.

If Load Preset List option is selected in the previous step next steps will be skipped and the preset channel

list installation will start. If the correct satellite has not been selected for SatcoDX installation, a warning

dialogue will be displayed on the screen. The satellite/s that can be selected will be listed. Press OK to close

the dialogue and then set the satellite accordingly.

Channel Scan screen will be displayed next. Select Scan and press OK or the Right directional button to proceed

with the scanning congurations. Select Skip Scan to proceed without performing a scan and complete the

initial setup.

DVBS Scan Congure screen will be displayed next if Scan option is selected. Following options will be available:

Scan Mode and Channels. You can choose to perform a full scan or a network scan. Set the Scan Mode

accordingly. If you are going to perform a network scan, make sure that you have adjusted the Frequency,

Symbol Rate (kSym/s) and Polarisation parameters under the Transponder option accurately on the Satellite

Setup screen. You may not be able to change the Scan mode setting depending on the previous selections.

If the Channels option is set as Free encrypted channels will not be installed. Additional options may also be

available depending on the selected operator, congure these settings according to your preferences. Once

you are done with setting the available options, press the Right directional button to start scan while Scan

Mode or Channels is highlighted. While the search continues you can press the Back button to cancel the

search. The channels that have already been found will be stored in the channel list.

When the initial setup is completed results will be displayed. Press OK to nish the setup.

Home Screen will be displayed. You can highlight Live TV app and press OK to switch to Live TV mode and

watch TV channels.

8. Home Screen

To enjoy the benets of your Android TV, your TV must be connected to the Internet. Connect the TV to a home

network with a high-speed Internet connection. You can connect your TV wirelessly or wired to your modem/

router. Refer to the Network & Internet and Connecting to the Internet sections for further information on

how to connect your TV to the internet.

The Home menu is the centre of your TV. Press the Home button to display Home Screen. From the Home

menu you can start any application, switch to a TV channel, watch a movie or switch to a connected device.

Depending on your TV setup and your country selection in the initial setup the Home menu may contain

dierent items.

The available options of the Home Screen are positioned in rows. To navigate through the Home Screen options

use the directional buttons on the remote. Apps, YouTube, Google Play Movies & TV, Google Play Music and

Google Play related rows and rows of the applications you have installed might be available. Select a row then

move the focus to the desired item in the row. Press OK button to make a selection or to enter a sub-menu.

On the upper left of the screen, search tools will be located. You can choose either to type a word to start a

search via the virtual keyboard or try voice search option if your remote has a built-in microphone. Move the

focus to the desired option and press OK to proceed.

On the upper right of the screen, Notications, Inputs, Network & Internet (will be named as Connected or

Not Connected according to the current connection status), Settings and the current time will be displayed.

You can congure your date and time preferences using the Date & time menu options from the Settings->

Device Preferences menu.

First row will be the Apps row. Live TV and Multi Media Player apps will be available alongside with other apps.

Highlight Live TV and press OK to switch to Live TV mode. If the source was set to an option other than TV

previously, press the Source button and set as TV in order to watch live TV channels. Highlight Multi Media

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 7000D Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 7000D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info