Bedienungsanleitung Nokia 7500 (Seite 48 von 80) (Englisch)

296450

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

● PIN code request and UPIN code request — to set the device to ask for your PIN or

UPIN code every time the device is switched on. Some SIM cards do not allow the

code request to be turned off.

● PIN2 code request — to select whether the PIN2 code is required when using a

specific device feature which is protected by the PIN2 code. Some SIM cards do not

allow the code request to be turned off.

● Call barring service — to restrict incoming calls to and outgoing calls from your

device (network service). A barring password is required.

● Fixed dialling — to restrict your outgoing calls to selected phone numbers if this

function is supported by your SIM card. When the fixed dialing is on, GPRS connections

are not possible except while sending text messages over a GPRS connection. In this

case, the recipient’s phone number and the message center number must be included

in the fixed dialing list.

● Closed user group — to specify a group of people whom you can call and who can

call you (network service)

● Security level — Select Phone to set the device to ask for the security code whenever

a new SIM card is inserted into the device. If you select Memory, the device asks for

the security code when the SIM card memory is selected, and you want to change the

memory in use.

● Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or

barring password

● Code in use — to select whether the PIN code or UPIN code should be active

● Authority certificates or User certificates — to view the list of the authority or user

certificates downloaded into your device.

See "Certificates," p. 67.

● Security module sett. — to view Secur. module details, activate Module PIN

request, or change the module PIN and signing PIN.

See "Access codes," p. 11.

Software updates over the air

Warning: If you install a software update, you cannot use the device, even to

make emergency calls, until the installation is completed and the device is restarted. Be

sure to back up data before accepting installation of an update.

Your service provider may send device software updates over the air directly to your

device (network service). This option may not be available, depending on your device.

Software update settings

To allow or disallow software updates, select Menu > Settings > Configuration >

Device manager sett. > Serv. softw. updates and the following options:

● Always allow — to perform all software downloads and updates automatically

● Always reject — to reject all software updates

● Confirm first — to perform software downloads and updates only after your

confirmation (default setting)

S e t t i n g s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 7500 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 7500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info