751125
12
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
5.1. Magic button (model 7500A)
Connect power
Important: The TV set is designed to operate on 220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet. The TV will switch on automatically.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights up. To switch on the TV from standby mode either:
Press the Standby button on the remote control.
To turn on the TV set, press the control switch in the center of the TV set.
To switch the TV into standby
The TV cannot be switched into standby mode via control switch. Press and hold the Standby button on the
remote control. Power o dialogue will appear on the screen. Highlight OK and press the OK button. The TV
will switch into standby mode.
To switch o the TV
To power down the TV completely, unplug the power cord from the mains socket.
Quick standby mode
In order to switch the TV into quick standby mode either;
Press the Standby button on the remote. Press again to go back to operating mode.
Press the centre of the control switch on the TV in and hold it down for a few seconds. Press again to go back
to operating mode.
5.2. On-O button
Connect power
Important: The TV set is designed to operate on 220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet. The TV will switch on automatically.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights up. To switch on the TV from standby mode either:
Press the Standby button on the remote control.
Press the control button on the TV. The TV will then switch on.
To switch the TV into standby
The TV cannot be switched into standby mode via control button. Press and hold the Standby button on the
remote control. Power o dialogue will appear on the screen. Highlight OK and press the OK button. The TV
will switch into standby mode.
To switch o the TV
To power down the TV completely, unplug the power cord from the mains socket.
Quick standby mode
In order to switch the TV into quick standby mode either;
Press the Standby button on the remote. Press again to go back to operating mode.
Press the control button on the TV. Press the control button again to go back to operating mode.
5.3. Turning on/o the Nokia Smart TV 2400A
5.3.1. Connected with power adapter
Connect power
Important: The TV set is designed to operate on a 12 V DC supply. For this, an adaptor is used which gives 12 V voltage.
12
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Nokia 7500A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Nokia 7500A

Nokia 7500A Bedienungsanleitung - Deutsch - 43 seiten

Nokia 7500A Bedienungsanleitung - Holländisch - 46 seiten

Nokia 7500A Bedienungsanleitung - Französisch - 47 seiten

Nokia 7500A Installationsanweisung - Alle Sprachen - 32 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info