Bedienungsanleitung Nokia 7500A4KDA (Seite 14 von 41) (Englisch)

748355

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

English - 14 -

set as On. In order to configure other settings of the

satellite and to enable scan this option should be set

as On first. Press Back button and select next satellite

you want to set. After you completed the configuration

changes, press the Right directional button to proceed.

(*) If you have a Direct satellite system, DiSEqC Set option

should be set as DiSEqC A.

Channel Scan screen will be displayed next. Select

Scan and press OK or the Right directional button

to proceed with the scanning configurations. Select

Skip Scan to proceed without performing a scan and

complete the initial setup.

DVBS Scan Configure screen will be displayed next

if Scan option is selected. Following options will be

available: Scan Mode and Channels. You can choose

to perform a full scan or a network scan. Set the

Scan Mode accordingly. If you are going to perfrom a

network scan, make sure that you have adjusted the

Frequency, Symbol Rate (Ksym/s) and Polarization

parameters under the Transponder option accurately

on the Select Satellite screen. You may not be able

to change the Scan mode setting depending on the

previous selections. If the Channels option is set

as Free encrypted channels will not be installed.

Additional options may also be available depending

on the selected operator, configure these settings

according to your preferences. Once you are done

with setting the available options, press the Right

directional button to start scan while Scan Mode or

Channels is highlighted. While the search continues

you can press the Back button to cancel the search.

The channels that have already been found will be

stored in the channel list.

When the initial setup is completed “Complete”

message will be displayed. Press OK to finish the

setup.

A disclaimer of liability will be displayed on the screen.

You can use Up and Down directional buttons to scroll

through and read the entire text. Highlight Accept and

press OK to proceed.

Home Screen will be displayed. You can highlight Live

TV app and press OK to switch to Live TV mode and

watch TV channels.

[NOTDVBS]

Initial Setup Wizard

Note: Follow the on-screen instructions to complete the initial

setup process. Use the directional buttons and the OK button

on the remote to select, set, confirm and proceed.

When turned on for the first time, a search for acces-

sories will be performed before the initial setup starts.

Follow the on-screen instructions to pair your remote

control (depends on the model of the remote control)

and other wireless accessories with your TV. Press

Back/Return button to end adding accessories and

start the setup.

1. Welcome Message and Language Selection

“Welcome” message will be displayed along with

the language selection options listed on the screen.

Select the desired language from the list and press

OK to continue.

2. Quick Setup

If you didn’t priorly connect your TV to the internet via

Ethernet a screen will be displayed where you can

transfer your Android phone’s WLAN network and

Google Account to your TV. Highlight Continue and

press OK to proceed. Follow the on-screen instructions

on your TV and your phone to complete the process.

You can also skip this step by selecting Skip option.

Some steps may be skipped depending on the settings

made in this step.

If you did priorly connect your TV to the internet via

Ethernet a message will be displayed stating that you

are connected. You can choose to continue with wired

connection or change the network. Highlight Change

network and press OK if you want to use wireless

connection instead of wired connection.

3. Network Connection

You will be directed to the next step automatically, if you

connect your TV to internet via Ethernet at this point. If

not, available wireless networks will be searched and

listed on the next screen. Select your WLAN network

from the list and press OK to connect. Enter the

password using the virtual keyboard if the network is

password protected. Select the Other network option

from the list, if the network that you want to connect

has hidden SSID.

If you prefer not to connect to the internet at this point

you can skip this step by selecting Skip option. You

can connect to internet later using the Network &

Internet menu options in the Settings menu from

the Home Screen or from the TV options menu in

Live TV mode.

This step will be skipped if internet connection has

been established in the previous step.

4. Sign in to your Google account

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 7500A4KDA Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 7500A4KDA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info