Bedienungsanleitung Nokia 9000i (Seite 33 von 126) (Englisch)

297910

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

Chapter 4 - Telephone 4-5

Note: The transfer operation can be made only if

you have one held call and one active call;

all calls are voice calls (fax or data calls

cannot be transferred); and none of the

calls is a conference call.

There are two ways to transfer voice calls from

the phone interface:

1. Press 4 followed by , or

2. Press and hold the Menu key for a second.

Choose the Transfer option in the menu and

press OK, or press Quit to cancel.

Calls can also be transferred from the communi-

cator interface. When you have one call on hold

and another call active, press Call commands

and choose the option Transfer call. Press OK.

Answering a waiting call

Call waiting is a network service which must be

activated before you can use it (see ”Telephone

settings” on page 4-6).

When Call waiting is active, and you receive a

new call while you already have an active voice

call, you will see a note informing you of this.

A waiting call is answered, like any call, by se-

lecting the waiting call and pressing Answer. The

previous call will be put on hold.

Sending DTMF tones

The Dual Tone Multi Frequency (DTMF) tones al-

low you to communicate with voice mailboxes,

computerised telephony systems, etc. Besides the

numbers 0 - 9, you can also use the characters p,

w, * and # (for information on the functions of

these characters, see chapter 3 "Contacts: Con-

tact cards - Storing DTMF tones" on page 3-3).

To send a DTMF sequence when you have an ac-

tive call:

1 Key the digits from the communicator inter-

face keyboard. Each keystroke will generate a

DTMF tone which will be transmitted directly.

Or alternatively,

1 Press Send DTMF. A list of stored DTMF se-

quences is shown (for information on how to

store DTMF sequences, see chapter 3 "Con-

tacts: Contact cards - Storing DTMF tones" on

page 3-3).

2 Select a DTMF sequence. You can edit the se-

quence, or, if there are no stored sequences,

you can enter the DTMF string manually into

the field.

3 Press Send to send the DTMF sequence shown

in the input field, at the bottom of the display.

Note: You cannot access the DTMF view during

a conference call. However, you can send

DTMF tones during a conference call by

entering the digits from the keyboard.

Alternating calls

Alternating calls can be made to a fax box, for

example: you initiate the call as a voice call, but

it changes into a fax call when your fax box

starts to send you your faxes.

To make alternating calls you need to add a spe-

cial Tel/Fax field to the contact cards of the re-

cipients of your alternating calls (see chapter 3

"Contacts: Contact cards - Customising contact

cards" on page 3-2).

You can also change the mode of the call from

voice to fax manually by pressing Change mode.

Alternating calls cannot be put on hold or incor-

porated into a conference call.

Incoming faxes, short messages and data

Faxes, short messages and incoming data are re-

ceived automatically, provided that the phone

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 9000i Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 9000i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info