Bedienungsanleitung Nokia 9000i (Seite 62 von 126) (Englisch)

297910

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

7-16 Defining Telnet connections

Telnet

The Telnet application is activated in the Internet

main view by selecting Telnet and pressing Select.

The Telnet application is used to make a connec-

tion to a remote computer via the Internet.

The Telnet application is similar to the Terminal

application, in that both applications emulate

the VT100 terminal display (see figure 7-8). The

display occupies the left side of the screen. The

screen size is 80 characters in 24 lines.

Once a Telnet connection is established, you

must in most cases enter your login name and a

password in order to be able to use the services

provided by the host computer. The Telnet main

view shows all pre-defined Telnet hosts.

To connect with a pre-defined Telnet host, select

a host and press Connect (see "Defining Telnet

connections: Telnet connection" on page 7-16).

To create new or edit existing connections, press

Define. See “ Defining Telnet connections” below.

Defining Telnet connections

After you have pressed Define in the Telnet main

view, the defined Telnet connections are shown.

To edit existing connections, press Edit.

To define new Telnet connections, press New.

To delete the selected connection, press Delete.

Pressing Edit or New opens the Define Telnet

connection view, where you can define the fol-

lowing settings:

Connection name — Edit an existing or enter a

new connection name. The name can be defined

freely.

Destination host — Edit an existing or enter a

new connection address. The host is identified by

either a numeric IP address or a correct textual

host name.

Internet access — Select a service provider from

those currently defined. To change the preferred

service provider, press the Change command

button.

Backspace key — Defines whether the keyboard

backspace key is used as a backspace (BS - de-

fault) or delete (DEL) key.

Telnet connection

When you have connected to the remote system,

the following commands become available (see

figure 7-8):

Press Keys to emulate the VT100 special keys,

which are not available on the communicator

keyboard. The special keys include:

• Four programmable function keys (PF1-4)

• All VT100 application keypad keys (numbers

1-9, minus, comma, period, dash, enter)

• The following VT100 functions: reset

terminal, Ctrl-\, Ctrl-], Ctrl-~.

In a Telnet connection, these special keys include

the following commands (can be used in remote

systems that support them):

Interrupt — Interrupts the current process on

the remote computer.

Skip command output — Prevents command

output from being displayed on the screen.

Are you there? — Enquires whether the remote

system is still running (if the execution of a

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 9000i Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 9000i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info