Bedienungsanleitung Nokia 9000i (Seite 84 von 126) (Englisch)

297910

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

10-8 Install/Remove software

Install/Remove software

The Install/Remove software application enables

you to install communicator software from a PC

and later remove the software from the commu-

nicator.

The Install/Remove software main view displays

the serial connection type and the PC drive used.

Press Settings to change the connection type or

to redefine the PC drive used. The connection

type is changed by pressing Change. The directo-

ry name and path can be edited manually.

Before using this application, make sure that the

connectivity software has been installed on your

PC and is running (see ”Connecting to a PC” on

page 10-5).

To install software:

1 Press Install in the Install/Remove software

view. The communicator starts to search for

software to install from the designated PC

drive. If installable software is found, it will be

listed on the screen.

2 Select the software you want to install with

the selection frame and press Install.

When installation is complete, the confirmation

note tells you under which application button

the software was installed (destination cannot

be selected). If an application with the same

name as the software to be installed already ex-

ists, you will be asked to confirm the replace-

ment operation by pressing Replace or to cancel

it with Cancel.

To remove software

1 Press Remove to search for removable soft-

ware on the communicator. The amount of

free space on your communicator is also dis-

played.

2 Select the software you want to remove and

press Remove.

Note: The set of applications that are on the

communicator at the time of purchase

cannot be removed.

Caution: Beware of viruses! Install into the No-

kia 9000i Communicator only software you have

obtained from sources that offer adequate pro-

tection against viruses.

Backup/Restore

The Backup/Restore application enables you to

make backups of various data on your communi-

cator, and to restore it later. Data is backed up in

sets which are stored in separate directories on

the PC.

Before using this application, make sure that the

connectivity software has been installed on your

PC and is running (see ”Connecting to a PC” on

page 10-5).

When data is backed up the previous contents of

the backup directories will be deleted. If you

want to keep the previous backup set, you should

copy the files to another directory on the PC, or

change the backup directory in the Backup/Re-

store settings before making a new backup.

When data is restored, only files with similar names

in the destination folder will be overwritten.

The Backup/Restore main view shows the data

group which will be backed up or restored, the

connection type (infrared or cable) and the back-

up or restoration directory. Press Settings to

change the connection type or the path to the PC

directory.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 9000i Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 9000i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info