Bedienungsanleitung Nokia 9300 gps (Seite 10 von 103) (Englisch)

297914

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

The picture shows the normal use of the device at the ear for voice calls. See "Operating environment," p. 98.

Access codes

The device uses several access codes to protect against unauthorized use of the device and the SIM card.

You need the following access codes:

• PIN and PIN2 code — The PIN (Personal Identification Number) code protects your SIM card against unauthorized use and is

usually supplied with the SIM card. The PIN2 code may be supplied with some SIM cards, and is required to access some

functions, such as fixed dialing.

After three consecutive incorrect PIN code entries, the PIN code is blocked, and you must unblock it with a PUK (Personal

Unblocking Key) code before you can use the SIM card again. The PIN2 code may be supplied with some SIM cards, and is

required to access some functions, such as fixed dialling number. If the codes are not supplied with the SIM card, contact the

service provider for your SIM card.

• Lock code — The lock code protects your device against unauthorized use. The default lock code is 12345. Change the code,

and keep the new code in a safe place, separate from your device.

• PUK and PUK2 codes — The PUK (Personal Unblocking Key) code is required to change a blocked PIN code. The PUK2 code is

required to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact the service provider for your

SIM card.

• Barring password — The barring password is needed when using the Call barring service. See "Changing the barring

password," p. 65.

Some applications of the device use passwords and user names to protect against unauthorized use of the Internet and its

services. These passwords are changed in the settings of the applications.

First start-up

The first time you switch your device on, you need to set some basic settings. You can change the settings later. Open the cover

and follow the instructions on the communicator display.

1. Select the language for the device, and press OK. If you change the language, reboot the device.

2. Select your home city from the list, and press OK. You can browse for a city by starting to type the name of the city, or using

the joystick or arrow keys. It is important to select the correct city, because scheduled calendar entries that you create can

change when the home city is changed.

3. Set the time and date, and press OK.

4. Press OK to create your own contact card.

5. Enter your contact card information, and press OK.

6. Press OK.

The default folders are created during the first start-up. Note that if you change the language of the device later, folder names

do not change.

G e t t i n g s t a r t e d

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 9300 gps Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 9300 gps

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info