Bedienungsanleitung Nokia 9300 gps (Seite 81 von 103) (Englisch)

297914

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

Sending data with Bluetooth

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or

forwarded.

There can be only one active Bluetooth connection at a time.

1. Open an application where the item you want to send is stored. For example, to send a photo to another device, open the

Images application.

2. Select the item you want to send, press Menu, and select File > Send > Via Bluetooth.

3. If you have searched for Bluetooth devices earlier, a list of the devices that were found previously is shown first. You can see

a device icon and the device name. To start a new search, press Search again. To interrupt the search, press Stop.

4. Select the device you want to connect with, and press Select.

5. If the other device requires pairing before data can be transmitted, you are asked to enter a passcode. Create your own

passcode (1-16 characters long, numeric), and agree with the owner of the other Bluetooth device to use the same code.

The passcode is used only once, and you do not have to memorize it. Devices that do not have a user interface have a preset

passcode. After pairing, the device is saved to the Paired devices page.

6. When the connection has been established successfully, the note Sending... is shown.

Receiving data with Bluetooth

If you want to receive data using Bluetooth, set Bluetooth to be active and select the option Shown to all.

When you receive data with Bluetooth from a device that is not authorized, you are first asked if you want to accept the Bluetooth

message. If you accept, the item is placed in the Inbox folder in the Messaging application.

Tip: If the received item is not in the Inbox folder, go to Desk > Office > File manager, and view the contents.

Pairing with a device

Pairing means authentication. Pairing with a device makes device searches quicker and easier.

Go to Desk > Tools > Control panel, and select Connections > Bluetooth.

To pair with a device, select the Paired devices page. Press New, then Start to start a device search. Select the device you want

to pair with, and press Pair. Enter the passcode, and press OK. If you want the other device to be authorized, press Yes. If you

select No, connection requests from the other device need to be accepted separately every time.

Tip: The users of the devices using Bluetooth technology should agree together on the passcode, and use the same

passcode for both devices in order to pair them. Devices that do not have a user interface have a preset passcode.

To cancel pairing, select the Paired devices page. Select the device whose pairing you want to cancel, and press Delete.

To assign a short name for a paired device, select the Paired devices page. Select the device whose name you want to change,

and press Edit. In the Assign short name field, you can define a short name (nickname, alias) to help you recognize a certain

device. This name is stored in the device memory and cannot be seen by other Bluetooth device users.

To set a device to be authorized or unauthorized, select the Paired devices page. Select the device, and press Edit. Move to the

Device authorised field, and select Yes. Connections between your device and the other device can be made without your

knowledge. No separate acceptance or authorization is needed. Select Yes for your own devices, for example, your PC, or devices

that belong to someone you trust. The icon is added next to authorized devices in the list of paired devices. If you select

No, connection requests from this device need to be accepted separately every time.

To connect to a Bluetooth device, select the Paired devices page. Select the device from the list, press Edit, and press Connect.

Note that this option is available only with audio devices that require a more stable Bluetooth connection, for example, Bluetooth

headsets or car kits. Such devices must support the Bluetooth 1.1 specification and Handsfree profile. To end the connection to

the selected device, press Disconnect.

SIM access profile

Using a Bluetooth connection and the SIM access profile, you can access your SIM card with a compatible car kit phone. See "SIM

access profile," p. 62.

Ending a Bluetooth connection

A Bluetooth connection is disconnected automatically after sending or receiving data. Only with the PC Suite, and some

enhancements such as headsets, the connection may be maintained even if it is not actively used.

Checking the status of the Bluetooth connection

Bluetooth is active.

C o n n e c t i v i t y

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 9300 gps Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 9300 gps

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info