6
devices. When the headset is
connected to at least one device and
is ready for use, the blue indicator
light flashes slowly. If the headset
has not been paired with a device, it
automatically enters pairing mode.
To switch off, press and hold the
multifunction key for about 5
seconds. The headset beeps, and the
red indicator light is briefly
displayed. If the headset is not
connected to a device within about
30 minutes, it switches off
automatically.
Pair and connect the headset
Before using the headset, you must
pair and connect it to a compatible
device.
You can pair the headset with up to
eight devices, but you can connect
it to a maximum of two devices at a
time.
1. Make sure your mobile device is
switched on and the headset is
off.
2. If the headset has not been
previously paired with a device,
switch on the headset. The
headset enters pairing mode, and
the blue indicator light starts to
flash quickly.
If the headset has been
previously paired with a device,
make sure the headset is
switched off, and press and hold
the multifunction key for about 5
seconds until the blue indicator
light starts to flash quickly.
3. Within about 3 minutes, activate
the Bluetooth feature on your
device, and set it to search for
Bluetooth devices. For details,
see the user guide of your mobile
device.