Bedienungsanleitung Nokta Makro Invenio (Seite 7 von 36) (Englisch)

801544

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

INTRODUCTION TO THE DEVICE

ON / OFFOPTIONS

SCREEN

CAPTURE

PAN

ROTATE

TRACE

SETTINGS INFO

abcdefg

BACK OK

a c b

(1) LCD SCREEN

(2) UPPER KEYPAD - The functions of the buttons on this keypad are

explained further in the relevant sections of the manual.

a) SETTINGS BUTTON : It is used to access the settings in the

Detection, Scan and Result Screens.

b) TRACE BUTTON : It is used to follow the search coil in the detection

screen with the IPTU sensor.

c) PAN/ROTATE BUTTON : It allows you to rotate and slide the 3D graph

in the result screen.

d) SCREEN CAPTURE BUTTON : It takes a snapshot of the screen. It

can be used in all menus and screens. Once you press this button, it

takes the screen image, assigns a record number to it and then saves it

in SCREENSHOTS under ARCHIVES by recording its date and time as

well. When this button is pressed, a window with the following message

will appear on screen : ''Screenshot is successfully saved as...''. To remove

this window, press the OK or the BACK button.

e) INFO BUTTON : This button is used to open and close the information

bar located at the bottom of the screen.

f) OPTIONS BUTTON : Allows you to access the general settings of the

device.

g) ON/OFF BUTTON : It powers the system box on and off.

(3) LOWER KEYPAD - The functions of the buttons on this keypad are

explained further in the relevant sections of the manual.

a) BACK BUTTON : It allows you to exit the current screen or to go

back to the previous one. In addition, it is used to remove the pop-up

message windows from screen.

b) OK BUTTON : This button is used to confirm an action or to go to

the result screen after performing a scan.

c) DIRECTION/VOLUME/ZOOM BUTTONS : This set of keys has 3

different functions :

1- To navigate between the menu options and to adjust the settings.

2- To increase and decrease the volume with the plus (+) and minus (-)

buttons in the detection screens as well as when the tutorial videos are

being played.

3- The up and down zoom buttons are used to magnify or reduce the

target signal graphs in detection screens. They are also used to fast

forward or rewind the tutorial videos.

d) ZOOM IN BUTTON : Brings the detection and scan grounds closer

on the screen. When fully zoomed in, the scale is 50cm.(20''). It is also

used to zoom in to the 3D graph on the result screen.

e) ZOOM OUT BUTTON : Takes the detection and scan grounds further

away on the screen. When fully zoomed out, the scale is 800 cm. x 800

cm (≈ 26ft. x 26ft.). It is also used to zoom out from the 3D graph on the

result screen.

(4) SPEAKER

(5) SCREEN FIXING SCREW

(6) WIRED HEADPHONES SOCKET

(7) EXTERNAL USB MEMORY SOCKET

(8) BATTERY

(9) BATTERY LOCK

5 9

SYSTEM BOX

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokta Makro Invenio Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokta Makro Invenio

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info