Bedienungsanleitung Nokta PulseDive 2-in-1 Set (Seite 3 von 12) (Englisch)

801561

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

3 42

1) Control Unit

2) On-Off and Retune Button

3) F - Function Button

4) A - Adjustment Button

5) Green LED

6) Red LED

7) LED Flashlight

8) Scuba Coil & Washer (white)

9) Charging Port

10) Speaker

11) Battery Compartment Cover

12) Battery Compartment Cover (for land

use)

13) Pointer Coil & Washer (black)

14) Dust Protection Cap

15) Replaceable Hard-Shell Pointer Case

The PulseDive can be purchased in 2 models: Scuba Detector & Pointer

2-in-1 Set and as a stand-alone Pinpointer only. Both models have the same

functions and operate the same way. The only difference between them is

the scuba coil and some accessories included in the 2-in-1 set. If you bought

the stand-alone pinpointer, please disregard the instructions about the scuba

coil in the assembly section. You can purchase the scuba coil separately to

add that functionality at anytime.

INTRODUCTION TO THE DEVICE

WARNINGS

The PulseDive is a state-of-the-art electronic device. Do not operate the device

before reading the user manual.

Do not store the device and search coil under extremely low or high

temperatures for extended periods. (Storage Temperature: - 20°C to 60°C /

- 4°F to 140°F)

The device has been designed with IP68 rating as a waterproof unit up to 60

meters (200ft.). However, you must pay attention to the warnings below:

1. Do not wash or immerse the coils in water when they are not mounted on

the device!

2. Each time before submerging the device in water or before washing it, make

sure that:

a. One of the coils is attached correctly and securely. You cannot change the

coils underwater!

b. The coil o-ring is placed snugly.

c. The o-ring inside the battery compartment cover is placed snugly and the

cover is secured tightly.

3. The PulseDive comes with 2 battery compartment covers. While using the

device in dive mode, use the battery compartment cover that comes attached

to the device and while using the device on land, use the one that is designed

for land use to obtain a louder volume. To prevent the filter, which is used on

the cover for land use, from any damage, do not insert any sharp objects into

the holes for cleaning or any other purposes.

4. When using the PulseDive in sand, the dust protection cap must be attached

to the other coil that is not mounted on the device! If sand is stuck on the

o-ring, brush the sand off.

Pay attention to the items below after using the device especially under salty

water:

1. Make sure that one of the coils and the battery compartment cover are

attached and wash the device with tap water.

2. Do not use any chemicals for cleaning and/or for any other purposes.

Protect the detector against impacts during normal use. For shipping, carefully

place detector in original carton and secure with shock resistant packaging.

The PulseDive may only be disassembled and repaired by Nokta Authorized

Service Centers. Unauthorized disassembly/intrusion into the metal detector

control housing for any reason voids the warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokta PulseDive 2-in-1 Set Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokta PulseDive 2-in-1 Set

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info