Bedienungsanleitung Nokta The Legend (Seite 29 von 32) (Englisch)

801554

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

It is the headlight used for lighting the area you are

scanning while detecting at night or in dark locations.

LED Flashlight does not operate when the device is off. It is

recommended to turn it on only when necessary since its

operation consumes extra battery power.

LED Flashlight setting can be set to 0 (off) or to 1 (on). The LED

Flashlight will be off at each start up.

Turning the LED Flashlight On/Off

1. Press the Power & Settings Button once. Select LED Flashlight

using the right and left buttons. The current value will be

displayed on screen: 0 (off) or 1 (on).

2. Turn the flashlight on/off using the plus (+) and minus (-) buttons.

3. Press the Power & Settings Button once to go back to the main

screen.

When the LED Flashlight is on, the flashlight icon will be displayed

in the info section at the top of the screen.

This setting is used to turn on and off the wireless

Bluetooth® connection.

Bluetooth® setting can be set to 0 (off) or to 1 (on). When you turn

off and on the device, it will start with the last setting you chose.

Turning the Bluetooth® Connection On/Off

1. Press the Power & Settings Button once. Select Bluetooth®

using the right and left buttons. The current value will be

displayed on screen.

2. Change the value using the plus (+) and minus (-) buttons.

3. When the wireless connection is turned on, the Bluetooth

Headphones icon will start blinking in the info section at the top

of the screen.

The device will search for the headphones it has been paired with

initially and try to connect to those. This will prevent the device

from connecting to other Bluetooth® devices when the Bluetooth®

setting is on. If you want to pair the device with different

Bluetooth® headphones (other than those it was initially paired

with) you must delete them from memory.

Once it pairs with any Bluetooth® headphones (Nokta BT

Headphones or other), one of the icons below will be displayed in

the info section:

Standard Bluetooth® headphones connected.

aptX™ Low Latency headphones connected.

4. Press the Power & Settings Button once to go back to the main

screen.

8. LED Flashlight

9. Bluetooth®

The LEGEND has a built in clock that is located in the right

upper corner of the screen.

Setting the Clock

1. Press the Power & Settings Button once. Select the clock

setting using the right and left buttons.

2. The plus (+) icon will appear on the screen. Press the plus (+)

button once.

3. You will see numbers and a small line underneath them in the

upper right corner. The line will be under the clock section. Using

the plus (+) and minus (-) buttons, first choose between 24-hour or

12-hour clock options (if 12-hour clock is selected, letter A for AM

or letter P for PM will come up).

Hearing the audio through the speaker and the Bluetooth®

headphones at the same time

When the Bluetooth® setting is selected, if the Bluetooth®

headphones are paired, press the up button and select 2.

For more detailed info about the Nokta BT Headphones, please

read the instructions included with the headphones.

Clearing Paired Headphones List

While in Bluetooth® setting, if the Pinpoint & Accept/Reject Button

is pressed long, the letters ''Fd'' will be displayed on screen for 2

seconds and the list of headphones that were paired with the device

before will be deleted. If you want to pair a new pair of headphones

after this, you must follow the pairing instructions again.

10. Clock

Once the headphones are paired with the device, if no sound

is transmitted to the headphones for 14 minutes, the

headphones will shut down automatically to save power.

Displaying the Bluetooth® chip version

When the Bluetooth® headphones are paired with the device and

the Bluetooth® setting is selected, press and hold the

Discrimination button. The Bluetooth® chip version will be

displayed in the clock section. When the button is released, the

clock will be displayed again.

532 is the current Bluetooth® software version.

530 is the previous Bluetooth® software version.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokta The Legend Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokta The Legend

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info