Bedienungsanleitung La Nordica FIAMMETTA (Seite 21 von 56) (Deutsch, Englisch, Französisch, Italienisch)

542368

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

FIAMMETTA BII – GIORGIA BII – ASIA BII – FIORELLA BII – LUCY BII

7196601 – EN 21

ATTENTION: Eventual flammable pieces in the area of 20 cm’s round the connection pipes must be changed with

fireproof and not sensitive to heat materials.

For a good operation of the equipment it is essential that in the installation place it is introduced sufficient air for

combustion (see chapter 7).

The depression on the chimney should be 12 Pascal (= 1.2 mm of water column). The measurement must be done

always with the equipment hot (rating calorific value). When the depression exceeds 17 PA (1.7mm of water column)

it is necessary to reduce the same with the installation of an additional flue adjuster (butterfly valve) on the exhaust

pipe or in the chimney.

For safety reasons the door of the stove must be opened only for the loading of the fuel or for removing the ashes,

while during the operation and the rest, the door of the hearth must remain closed.

7. AIR ENTRANCE INTO THE INSTALLATION PLACE DURING COMBUSTION

As the stoves take their combustion air from the installation place, it is essential that a sufficient quantity of air is

introduced in the installation room itself.

In case of tight doors and windows (for example houses built according to the energy saving criteria) it is possible that

the air entrance is not guaranteed, compromising the draught, the welfare and the security of the people. It is

necessary to guarantee a further air entrance through an external air intake, to be positioned in the nearby of the

appliance or through air connection towards outside or a near ventilated room, with the exception of thermal units

place or garages (FORBIDDEN).

The connection pipe must be flat with a minimum diameter of 120 mm, a maximum length of 4 m and with no more

than 3 bends. If there is a direct connection with the outside it must be endowed with a special windbreak.

The air entrance for combustion into the installation place must not be closed during the operation of the stove. It is

absolutely necessary that in the environment in which the stoves operate with the natural flue of the chimney, it is

introduced as much air as necessary for the combustion, i.e. up to 20 m

/hour.

The

natural recirculation of air must be ensured by some fixed openings on the outside. The size of the necessary

openings for air is fixed by the relevant prescriptions. Ask information to your chimney sweeper. The openings should

be protected with grids and should never be obstructed.

An extraction hood (aspirating) installed in the same room or in a room

nearby, in case of insufficient flow of fresh air may negatively affect the

functions of your appliance with the output of combusted gasses

(smoke, smell even if with the door closed). As consequence the

extraction hoods must not absolutely work at the same time with the

stove.

The depression in an extraction hood can at worst hypothesis,

transforms the flue into an external air intake, by sucking the

smokes of the rooms with dangerous consequences for the

people.

OPTIONAL

For a better comfort and corresponding oxygenation of environment,

the stove combustion air can be directly withdrawn at the outside. In

order to do that, the stove can be connected to the external air socket

by an optional junction (Picture 8 - C) ( Kit Ø 1

20 ).

8. ADMITTED/NOT ADMITTED FUEL

The fuels admitted are wood logs. One must use only logs of dry wood (water content max. 20 %). The size of wood

logs should be 30 cm’s long and 30 cm’s max in circumference.

The wood used as fuel must have a moisture contents lower than 20 %, which is obtained after at least 1 year drying

(tender wood) or 2 years (hard wood) and must be stored in a dry and ventilated place (for ex. Under a shed). The

wet wood makes ignition more difficult because it is necessary a greater quantity of energy to evaporate the existing

water. The humid contents has the disadvantage that, with the temperature lowering, the water condensates first in

the hearth and then in the chimney. The unseasoned wood contains about 60 % of H20, then it is not suitable to be

burnt. The following cannot be burnt: rests of coal, cut-offs, parts of barks and panels, wet wood or treated

with varnished, plastic materials. In this case the guarantee on the appliance lapses. Paper and carton must

be used only for ignition.

The combustion of wastes is FORBIDDEN by national law on the protection against emissions. This may

damage the stove and the chimney, causing health damages and claims by the neighbourhood owing to the bad

smell.

The wood is not a fuel which allows a continuous operation of the appliance, as consequence the heating all over the

night is not possible.

Picture 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

La Nordica FIAMMETTA Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info