Bedienungsanleitung NordicTrack T 13.0 - NETL13711.0 (Seite 23 von 36) (Englisch)

605449

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

THE INFORMATION MODE

The console features an information mode that keeps

track of treadmill information and allows you to person-

alize console settings.

To select the information mode, hold down the Stop

button while inserting the key into the console, and

then release the Stop button. When the information

mode is selected, the following information will be

shown:

The Time display will show

the total number of hours

the treadmill has been

used.

The Distance display will

show the total number of

miles or kilometers that the

walking belt has moved.

While the information mode is selected, press the

decrease button next to the Enter button to select

each of the following screens in the center display:

1. UNITS: To change the

unit of measurement,

press the Enter button.

To view distance in

miles, select ENGLISH.

To view distance in kilo-

meters, select METRIC.

2. DEMO MODE: The console features a display

demo mode, designed to be used if the treadmill

is displayed in a store. While the demo mode is

turned on, the console will function normally when

you plug in the power cord, press the power switch

into the reset position, and insert the key into the

console. However, when you remove the key, the

displays will remain lit, although the buttons will not

function. If the demo mode is turned on, the word

ON will appear in the center display. To turn on or

turn off the demo mode, press the Enter button or

the Speed decrease button.

3. CONTRAST LVL: Press the Incline increase and

decrease buttons to adjust the contrast level of the

displays. Then, press the Enter button.

If a module is connected, you may also select the

following screens:

4. MODULE: If an iFit Live module is connected, the

display will show the word WIFI. If a USB module is

connected, the display will show the word USB/SD.

If a SYNC is connected, the display will show the

word NIKE+.

5. AUDIO COACH: To turn on or turn off the audio

coach, press the Enter button.

If an iFit Live module is connected, you may also

select the following screens:

6. START MODE: The start mode will appear when

you insert the key into the console or when you

press the Home button. Press the Enter button re-

peatedly to select the manual mode or the iFit Live

mode as the start mode.

7. CHECK WIFI: Press the Enter button. The center

display will show the software version number,

the network SSID, the network encryption type,

the wireless signal strength, the IP address of the

module, the number of registered users and their

names, and the results of the DNS lookup.

8. SEND/OBTAIN DATA: To send and receive work-

outs, workout logs, and updates, press the Enter

button. When the process is nished, the words

TRANSFERS DONE will appear in the display.

To exit the information mode, remove the key from the

console.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NordicTrack T 13.0 - NETL13711.0 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NordicTrack T 13.0 - NETL13711.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info