Bedienungsanleitung Nordmende DSSN60 (Seite 9 von 15) (Englisch)

493113

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

LOADING YOUR DISHWASHER

If you properly place your dishes into the machine, you \Nill be using it in the best way in terms

of energy consumption, washing and drying performance.

There are two separate baskets for you to load your dishes into your machine. You can load into

the lower basket such round and deep items as pots with long handles, pot lids, plates, salad

plates, cutlery sets.

The upper basket has been designed for tea plates, dessert plates, salad bowls, cups and

glasses When placing long-stem glasses and goblets, lean them against the basket edge, rack

or glass supporter wire and not against other items. Do not lean long glasses against one

another or they cannot remain steady and may receive damage

It is more appropriate to locate the thin narrow parts into the middle sections of baskets.

You can place spoons among the other cutlery sets in order to prevent them from sticking to

one another. You are recommended to use the cutlery grid in order to obtain the best result.

To avoid any possible injuries, always place such long-handle and sharp-pointed dishes as

serving fork, bread knife etc. with their sharp points facing down or horizontally on the baskets.

Warning: Place your dishes into your machine in a way that they \NilI not prevent the upper and

lower spray arms from spinning

Top basket

Dish rack

There are dish racks on the upper basket of your

machine. ~

IIYou can use these dish racks in

open or closed position. When they are in open

position

Iyou can place your cups on them; and

when in closed position

IIyou can place long

glasses on the basket. Also, you can use these

racks by placing long forks, knives and spoons

on them laterally

Top basket height adjustment

Top basket of your machine is in upper position. When it is in this position, you can place big

items such as pans, etc. on lower basket. When you take top basket to lower position, you can

place and wash big sized plates on the top basket.

Use wheels in order to change the basket height. Open the basket retaining parts at the end of

top basket rails by turning them to the sides, and take the basket out. Change the position of the

wheels; reinstall the basket to the rail, and close basket retainer parts. In this way, you take the

top basket to lower position

•

is left when wiped by hand.!

Warning: Use only those rinse aid materials which are allowed for use in the machine. As rinse

aid residues left as a result of overflowing will create extremely high amounts of foam and thus

reduce the washing performance, remove the excess amount of rinse aid by wiping it with a rag.

Warning: Should any problem, which you have not encountered before, arise with the use of

this type of detergents, contact the detergent manufacturers directly.

When you give up using combined detergents

Fill the salt and rinse aid compartments.

• Adjust the water hardness setting to the highest position (6) and run an empty-wash.

Adjust the water hardness level.

• Make the suitable rinse aid setting.

Filling with rinse aid and making the sening

Rinse aid is used to prevent the stay of white water drops, lime

stains, white film strip-shaped stains that may form on the dishes,

as well as to increase the drying performance. Contrary to the

popular beliefs, it is used not only for obtaining shinier dishes but

also for obtaining sufficiently dried dishes. For this reason, care

should be taken that there is adequate amount of rinse aid in the

rinse aid compartment and only polishing material produced for

use at dishwashers should be used.

If the rinse aid lamp on the control panel becomes on fill the rinse

aid compartment with rinse.

To put rinse aid, remove the rinse aid compartment cap by turning

it.O Fill the rinse aid

compartment with rinse aid until the rinse aid level indicator becomes darklj refit the cap and

close it by turning it in a way that the nails will correspond to one another. By checking the rinse

aid level indicator on the detergent dispenser, you can understand whether or not your machine

needs rinse aid. A dark indicator means that there is rinse aid in the compartment, while a

light indicator shows that you

need to fill the compartment with

rinse aid.

The rinse aid level adjuster can be

set to a position between 1 and 6.

Factory setting for rinse aid is the

position 3. You need to increase

the degree of the adjuster if water

stains form on your dishes after a

wash, whereas you need to

decrease the degree If a blue stain

• When the conditions of use of such products and the machine settings are appropriate,

they ensure savings in salt and/or rinse aid consumption.

• Contact the detergent manufacturers if you are not obtaining good wash results (if your

dishes stay calcareous and wet) after having used 2 in 1 or 3 in 1 detergents. The scope of

warranty for your machine does not cover any complaints caused by the use of these types

of detergents.

Recommended usage: If you want to obtain better results while using combined detergents,

add salt and rinse aid into your machine and adjust the water hardness setting and the rinse aid

setting to the (1) lowest position.

A Solubility of the tablet detergents produced by different companies can vary

.•••. depending on the temperature and time. Therefore, it is not recommended to use

such detergents in short programs. It is more suitable to use powder detergents in such

programs.

Nordmende DSSN60 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info