Bedienungsanleitung Nova 320200 (Seite 12 von 39) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

493108

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

Steam Station Star Article 320200

1 Before using the iron for the first time,

verify that the mains voltage stated on

the base of the steam generator is the

same as your mains voltage.

2 Remove all labels and stickers that may

be attached to the iron.

Some parts of the iron are lightly greased,

and it is possible that the iron will emit a

little smoke when used for the first time.

This smoke will stop after a short period of

time, and is not indicative of a defect.

3 To remove residue from the soleplate,

set the temperature control dial to

‘max’, and iron over a damp cloth.

Preparing the appliance for use

• It is recommended that you fill the

water reservoir with a mixture of 50%

tap water and 50% distilled water. This

is particularly desirable in areas with

hard water, since this will prevent the

formation of excessive limescale.

• Make sure the water reservoir is

always filled, even if you do not plan

to use the steam function.

1 Place the appliance on a flat sturdy

surface.

2 Make sure the appliance is not plugged

in.

3 Remove the water reservoir cap (No.4)

from the top of the water reservoir.

4 Fill the water reservoir with the

indicated quantity of water.

5 Put the water reservoir cap (No.4) back

on the water reservoir and close it

tightly.

Use

• Never iron over zips, rivets in jeans,

etc. These will damage the soleplate.

Iron around any such objects.

• The steam generator’s holder for the

iron will become hot. Do not touch it

whilst you are ironing.

• Never point the soleplate at persons

during use, steam is very hot.

• Check whether ironing-instruction

labels are attached to clothing. Always

observe any such instructions.

• The filling aperture of the water

reservoir must not be opened during

use.

• Make sure that the appliance can not

fall when you place the iron on the

holder.

Dry ironing

1 Fill the water reservoir.

2 Put the iron on the steam generator’s

holder (No.6).

3 Put the plug in the wall socket and set

the on/off switch iron (No.11) to ‘I’. The

iron starts heating.

4 Adjust the temperature by turning the

iron’s temperature-control dial (No.1) to

the required setting. Adjust the

temperature in accordance with the

directions given in table 1.

5 When the temperature indicator light on

the iron (No.13) turns off, the

temperature is reached. You now can

start ironing.

Steam ironing

1 Fill the water reservoir.

2 Put the iron on the steam generator’s

holder (No.6).

3 Put the plug in the wall socket and set

the on/off switch iron (No.11) to ‘I’. The

iron starts heating.

4 Set the temperature-control dial (No.1)

in the desired position.

5 Set the steam generator switch (No.9)

to ‘I’. The steam generator will now heat

the water. Once the water has reached

the required temperature, the indicator

light "steam ready" on the base's

control panel (No.7) will light.

6 Adjust the temperature by turning the

iron’s temperature-control dial (No.1) to

the required setting. Adjust the

1081656_nova_steam station_320200_V1.book Page 9 Tuesday, August 26, 2008 12:08 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nova 320200 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info