8
1.4 Night vision
The camera has nine high-intensity LEDs for picking up clear images in
the dark. When the built-in photo sensor detects low ambient light levels,
the LEDs will automatically activate.
Note:
The image changes to black-and-white when Night Vision is active.
2 Monitor Setup
2.1 Power Supply
The monitor uses 3.7V 1000mAH (Li-ion) battery or the household AC
power current. The battery lasts for up to 3.5 hours with the display on
and up to 7 hours when the VOX function is in use (display off).
Note:
Rechargeable batteries are a disposable product. They deteriorate
gradually during use.
Extra battery packs can be purchased from your dealer. If you encounter
problems, consult the troubleshooting chart.
Loading the Battery
Note:
The Li-ion battery supplied should be charged for 10 hours before it
is used for the first time.
1. Open the battery compartment cover on the rear of the monitor.
See Fig. 7.
2. Insert the battery and make sure the polarity is correct. See Fig 7.
3. Close the battery compartment cover, and make sure it is locked
securely.
4. Turn the monitor on. See Fig 7.
Note 1
: When battery power is sufficient, the light is constantly red; when
the battery is low, the LED light will start blinking.
Note 2:
Remove the battery from the monitor if you do not plan to use it
for a prolonged period of time.
5. Adjust the volume to a comfortable level.
Using AC Power
1. Plug one end of the provided power adapter into a wall outlet and the
other end into the bottom of the monitor. See Fig. 8.
2.Turn the monitor on. See Fig.8.
3. Adjust the volume to a comfortable level.
Note 1:
When charging starts, and "ON" LED will appear blue . If charging
is finished (full charge), the "ON"LED light will turn red.
