LCD Brightness setting (ex factory 220)
Select «Extended basic settings»!
The «Coloureds 60°C» button can be used to alter the
brightness or text on the display.
LCD Contrast setting (ex factory 41)
Select «Extended basic settings»!
The «Coloureds 60°C» button can be used alter the
contrast on the display.
Alarm volume (ex factory Volume 2)
Select «Extended basic settings»!
With the Alarm setting switched ond, a signal sounds at
regular intervals at the end of the programme. The
volume can be adjusted in 3 levels using the «Coloureds
60°C» button.
Off
Volume 1
Volume 2
Volume 3
Standby function (ex factory ON)
Select «Extended basic settings»!
When the standby function is switched on, the controls
switch off when wash programme is running or laundry
weighing is carried out in energy saving mode.
All displays are dark.
Optical interface (ex factory OFF)
Select «Extended basic settings»!
If the optical interface (SCS) is switched on, customer ser-
vices can communicate with the machine by PC.
Reduced mains power (ex factory OFF)
Select «Extended basic settings»!
If the mains voltage is reduced, the programme times will
be extended accordingly.
Off = 400 V 2N ~ 4,2 kW / 10 AT
Off = 400 V 1N ~ 4,2 kW / 16 AT
On = 230 V 1N ~ 2,3 kW / 10 AT
Advice for testing bodies and users
In the goods declaration, this washing extractor was
awarded the top grade A in the washing effectiveness
category according to the Energy Label classification un-
der the EN 60456 standards programme. However, from
the factory, it is set up with standard wash programmes
developed especially to meet Swiss consumer needs,
although modern fabrics can be washed on shorter pro-
grammes thanks to today’s wearing and washing charac-
teristics. However, the standard programme times accor-
ding to the Energy Label can be set using the extended
basic settings by setting the wash time reduction
parameter to Off.
z The machine is now basically set to the longer wash
times according to the Energy Label.
EN 60456 Standard programme
Cotton 60°C:
«Coloureds 60°C» 112 minutes / 42 litres / 0,95 kWh
Problems
Repairs, alterations or intervention on electronic
equipment should only be carried out by qualified specia-
lists. Inexpert repairs can cause considerable damage and
risk to the user.
Only original spare parts should be used for repairs.
Rectifying minor faults yourself
The machine does not start after pressing a
programme button:
X Check whether the mains power is switched on at the
wall and the plug is in.
X Check whether all the fuses are intact or the safety
switch has tripped.
The machine does not start:
X The start button has not been pressed.
X Start time preselect has been set. Only starts at the
preselected start time.
Detergent residue in the detergent drawer:
X Damp or clumpy detergent.
Dry the detergent drawer before adding detergent (for
cleaning, see page 15). Use dosing aids for compact or
liquid detergents. Add the detergent to the dosing aid
and put it in the drum with the laundry.
X The divider for liquid detergent has been pressed
down. Move the divider to the position for powder de-
tergent (see page 6).
Water not visible during wash:
X Not a fault! The water is below the visible level in the
machine.
Poor wash result:
X Level of soiling was higher than usual.
X Change type and amount of detergent.
X Select the maximum permitted temperature for the fabric.
X Select a stronger wash programme.
Detergent residue on the washing:
X This is not due to poor rinse performance of your was-
hing machine, but insoluble residues found in a few
phosphate-free detergents, which tend to be deposited
as pale specks on laundry.
X Remedy: dry and brush off or repeat the whole rinse
process immediately. Change detergent if necessary.
Grey residue on the washing:
X The normal amount of detergent is not always
sufficient for soiling from ointments, fats or oils, increase
the amount for the next wash.
Remedy: select the maximum permitted temperature for
the fabrics.
Grey stains on the washing:
X These stains may be caused by cosmetics or fabric sof-
tener and may have appeared on the laundry outside the
machine before washing.
Remedy: some stains can be washed out after soaking in
liquid detergent.
Foam is visible after the last rinse:
X Some detergents tend to produce more foam, which
does not affect the rinse results.
Pump noise:
X Not a fault! The noises from the pump when filling
and pumping out are normal.
Repeated spinning:
X The imbalance control system detected an imbalance
and is rectifying the imbalance by spinning repeatedly.
19
