Bedienungsanleitung Novamatic WA6780 (Seite 45 von 52) (Deutsch, Englisch)

709023

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Cleaning and Maintenance

Hygiene programme

This washing machine is equipped with a hygiene

display and a hygiene programme.

This programme allows you to execute a hygiene

cleaning process of the machine. This is recommended

in particular if a fellow occupant has washed at a tem-

perature of less than 60°C before you. The machine will

indicate this displaying «70°C hygiene programme»

whenever you select a programme under 60°C.

In this case start your laundry day with a 60°C or 95°C

wash programme or select the hygiene programme.

Note

 If you want to do without additional hygiene measures,

you can also start your selected programme directly using

the start button.

Starting the hygiene programme

«Coloureds 60°C» + «Start»

The hygiene programme is started by holding down the

button «Coloureds 60°C» and pressing the Start button.

Do not use the hygiene programme with laundry and

detergent!

Cleaning the machine

Ensure that the power supply is switched off before any

cleaning, care or maintenance work.

Under no circumstances spray the machine with water

or clean it with a steam cleaner.

Do not use solvents! These substances can damage

parts of the machine, produce poisonous vapour and

carry the risk of explosion.

Casings and control areas should only be cleaned with

soap

or a commercially available, solvent-free, non-abra-

sive cleaning product.

The side walls of machines with a chrome steel nish

should not be cleaned with chrome steel cleaner under

any circumstances.

Descaling the machine

If the correct amounts of detergent are used, descaling

is no longer necessary in general.

Descalers contain acids, can attack parts of the machine

and cause discolouration of laundry.

If you do, however, wish to descale the machine, follow

the manufacturer›s instructions on the packet.

Limescale formation depends largely on the hardness of

the water. To avoid water damage, we recommend

having this checked by a specialist after around 5 years

of fault-free operation.

Cleaning the drum

Rust marks caused by metal parts standing still for

lengthy periods can be removed with a chlorine-free

cleaning product (look at the description of the ingre-

dients on the pack).

Never use steel wool!

Water supply hose

Only for machines without water stop. To avoid water

damage, we recommend having this checked by a

specia list after around 5 years of fault-free operation.

Frost protection

If the machine is in a room susceptible to frost, all residual

water must be removed from the detergent pump and

water supply and drain hoses immediately after use.

Emptying the drain pump

See chapter «Emergency emptying».

Emptying the water supply hose

 Turn off the water supply

 Screw off the hose at the tap, let the water run into a

bowl.

 Screw the hose back onto the tap.

Cleaning the detergent drawer

1. Pull the detergent drawer out until it stops.

2. Press down in the middle of the softener section cover,

and pull the drawer all the way out.

3. Remove the divider.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Novamatic WA6780 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Novamatic WA6780

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info