707332
35
Zoom out
Zoom in
Vorherige Seite
1/45
Nächste Seite
35
English
DAW GUIDE
We’re assuming that you are already quite familiar with the operation of your favourite DAW.
Because there are some differences in the way in which particular DAWs works with Impulse,
you should look at the Support page of the Novation website
(www.novationmusic.com/support), where you’ll nd specic guidance on using Impulse with
different DAWs.
Ableton Live and Clip-launch mode (Mac or Windows)
Ableton Live Lite 8 is a music software package which you will nd bundled with Impulse. You
will also nd a full User Guide for Ableton Live on the DVD included with Impulse. This contains
instructions on how to install it on your computer; there is also some additional information in
the Impulse Getting Started Guide.
There are some general points to note regarding the operation of Ableton Live Lite when using
Impulse as a controller.
When using Impulse 25 in Mixer mode, the rotary encoders will adjust the same
parameter on each track in a Bank of eight, the Bank depending on which Track is
currently selected in Ableton Live Lite. Thus, if Track 5 is selected, Tracks 1 to 8 will be
controllable; if Track 11 is selected, Tracks 9 to 16 will be controllable.
Page+ and Page– let you scroll through the available mixer parameters: Pan, Sends A to
D, for the current set of eight Tracks. On Impulse 25 only, Track Volume is also available
as a controllable parameter.
Ableton Live Lite’s mixer may be congured with any number of Return channels (A, B, C,
etc.), but Impulse only allows control of the rst four - Returns A to D.
On Impulse 25, the single fader will control the volume of the currently selected Track in
Mixer mode.
The Track+ and Track- buttons select the ‘active’ Track in Ableton Live.
The functions of the Transport buttons vary between Ableton Live Lite’s Session View and
Arrangement View.
Button Session View Arrangement View
Rwd Steps up one scene Rwd; Shift+Rwd = return to start
FFwd Steps down one scene FFwd; Shift+FFwd = go to end
Stop Stops Stop
Play Play Play
Loop Play Selected Scene Enables/disables Loop function
Rec Starts Arrangement Recording Records
Impulse can be placed in Clip Launch mode by pressing Roll and Arp buttons
simultaneously. This redenes the function of the drum pads, which now trigger the Clips
in the currently selected Scene. The pads will illuminate according to the Clip status:
Unlit – no Clip present
Yellow – Clip available
Green – Clip playing/ready to play
Red – Clip recording/ready to record
35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Novation Impulse wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Novation Impulse

Novation Impulse Bedienungsanleitung - Deutsch - 44 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info