Bedienungsanleitung Novoferm NovoSwing (Seite 9 von 49) (Deutsch, Englisch)

709171

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

Automatic closing (2)

Any pulse causes the gate to open.

The gate closes automatically at the end of the hold-

open time and the advance warning time.

Automatic closing (3)

Any pulse causes the gate to close.

The gate closes automatically at the end of the hold-

open time and the advance warning time.

When the light barrier is interrupted, the hold-open time

is stopped and the advance warning time starts.

Automatic closing (4)

Any pulse causes the gate to open.

The gate closes automatically at the end of the hold-

open time and the advance warning time.

When another pulse is received, the hold-open time is

stopped and the advance warning time starts.

Automatic closing with the start-stop function (5)

Any pulse causes the gate to open.

When the gate reaches open position, automatic closing

can be interrupted by a pulse sent within 3 seconds.

The figure „6“ is shown in the display. The next pulse

reactivates the automatic closing function.

Normal mode (0)

(Default mode)

The drive of the turning gate can be actuated by a pulse

transmitter such as a hand-held transmitter, key-

operated switch, etc. Short pulses are sufficient.

Functional sequence:

First pulse:

The drive starts and the gate moves to the set OPEN or

CLOSED end position.

Pulse received while the gate is moving:

Gate stops.

Next pulse:

Gate continues moving in the opposite direction.

Active wing control (only for normal mode)

With 2-wing doors, only one wing can be opened and

closed via the second channel of the hand-held

transmitter.

OPENC-CLOSE (1)

Functional sequence:

Pulse received when gate is closed:

The drive starts and the gate moves to the gate open

position.

Pulse received while the gate is moving up:

No effect on the gate

Pulse received while the gate is in up position:

Gate is moving up.

Pulse received while the gate is closing:

Gate stops and then moves open.

Guard functions

Internal force limitation

If the gate hits an obstacle while closing, the drive stops

and moves away from the obstacle in the opposite

direction.

During soft run mode when the gate is closing, it opens

again a little to release the obstacle.

If the gate hits an obstacle while closing, the drive stops

and reverses the movement for about one second.

Light barrier stop B

If a light barrier is installed and that light barrier is

interrupted while the gate is closing, the gate stops and

moves in the opposite direction. Interruption of the light

barrier while the gate is opening has no effect.

Light barrier stop A

If a light barrier is installed and that light barrier is

interrupted while the gate is moving, the gate stops.

Unlocking the drive

(only when mains supply is switched off)

The gate can be unlocked and moved

manually in setting mode, during power

failure or other trouble. Release the wheel

on the underside with the triangular wrench

and fold it down. The gate can now be

opened and closed manually.

Gate stops

A stop should be set for the reference move of the gate

to open position. The stop should be set at least 5 mm

behind the normal door open position.

Preferably, the internal stop should be used.

The mechanical stop is approached once during teach-

in and serves as reference point.

In normal operation, the gate stops at the taught position.

Operating instructions

Please read the operating instructions carefully before

starting the installation.

The gate should be installed by skilled technical personnel.

If the installation is wrong, person can be in danger.

The supplier is not responsible for damage caused due to

improper installation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Novoferm NovoSwing Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info