Bedienungsanleitung Novy 2917 (Seite 20 von 36) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

571854

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Setting the Electronic Clock

When you switch on the oven, you will notice

that the word AUTO will flash on the display with

00:00. Press the + and – symbols together

until you hear a beep and see a dot flashing

between the digits of the clock. Then set the

clock time by pressing on the + or – symbols.

You will hear a beep to confirm that the time

has been set. The symbol will remain lit.

Should you wish to change the time, follow

these instructions again.

Manual Operation

After setting the clock, the oven is ready for

use. Select a cooking temperature and function

by pressing and turning the oven controls.

To turn off the oven, set the controls to .

Push down on the controls to conceal them.

Electronic Clock Functions

Timer Alarm: An audible signal is produced at

the programmed time, even if the oven is not

being used.

Cooking Time: This function allows you to pro-

gramme cooking time length, after which the

oven will turn off automatically.

Cooking Stop Time: This function allows you to

programme the time for cooking to stop, after

which the oven will turn off automatically.

Cooking Time and Cooking Stop Time: This

function allows both cooking time length and

the stop time to be programmed. The oven

switches on automatically at the set time and

operates for the cooking time it has been pro-

grammed for. It switches itself off automati-

cally at the entered stop time.

Changing the Clock Alarm Tone

1 Press + and – at the same time. You will

notice a dot light up between the + and –

symbols on the clock display.

2 Press MODE and you will see “ton1” light up

on the clock display.

3 The alarm tone can be changed by repeat-

edly pressing on the – symbol.

Programming the Timer Alarm

1 Press on MODE until the symbol will

flash on the clock display.

2 Select the length of time after which you

want the alarm to sound by pressing on

+ or –.

3 The alarm will be confirmed by a beep and

the display will show the current time. The

symbol will remain lit.

4 At the programmed time, the alarm will

sound and the symbol will begin to flash.

5 Press on any symbol to turn off the alarm.

The symbol will continue to flash.

6 Keep pressing MODE until the function is

switched off.

You can see how much time is left at any time

by pressing MODE until the symbol flashes.

You can then change the selected time by

pressing + or -. The beep you hear will confirm

the new time has been set.

Programming Cooking Time

1 Press MODE until you hear a beep. Press

MODE again and the word “dur” will appear

on the clock display.

2 Select the cooking time by pressing + or –.

3 You will then hear a beep and the present

time and the word “AUTO” will light up to

show that the oven will switch off automati-

cally.

4 Select a cooking function and temperature.

5 When the set cooking time is over, the oven

will turn off and an alarm will sound.

Using the Oven

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Novy 2917 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info