Bedienungsanleitung Novy 6821 (Seite 11 von 24) (Deutsch, Englisch, Holländisch, Französisch)

741654

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

1 SAFETY AND ASSEMBLY

REGULATIONS

Further information on Novy products, accessories and

services may be found on the internet: www.novy.co.uk

These are the installation instructions for the appliance

as shown on the front. The directions for use are in a

separate booklet supplied with the appliance.

These installation instructions make use of a number of

symbols. The meanings of the symbols are shown below.

Symbol Meaning Action



Indication Explanation of an

indication on the hood.



Warning This symbol indicates

an important tip or a

dangerous situation

Observe this instruction in order to prevent injury and

damage to property.



Warnings before installation

−

This appliance complies with the applicable safety

instructions. However, inexpert installation may cause

personal injury or damage to the appliance.

−

The appliance is intended exclusively for household

use (preparation of food) and excludes all other do-

mestic, commercial or industrial use. Do not use the

appliance outside.

−

Check the condition of the appliance and the installation

ﬁttings as soon as you remove them from the packag-

ing. Remove the appliance from the packaging with

care. Do not use sharp knives to open the packaging.

−

Do not install the appliance if it is damaged, and in

that case inform Novy.

− Check on the basis of the drawing 1 that all the ma

terials for installation have been supplied. The grease

ﬁlters are in the appliance.

− Novy is not liable for damage resulting from incorrect

assembly, incorrect connection, incorrect use or in-

correct operation.

−

The installation and electrical connection of the appli-

ance should be left to a recognised expert.

−

Safety is guaranteed only with expert installation in

accordance with the installation manual. The installing

technician is responsible for proper operation at the

installation location.

− For easier installation of the appliance, it is advisable

to carry it out with at least 2 people.

−

Read the directions for use and the installation instruc-

tions before installing and using this appliance. You

will ﬁnd important information here for the assembly

and use of the appliance.

− Metal parts may have sharp edges, and you may in-

jure yourself on them. For that reason, wear protective

gloves during installation.



Installation instructions for the appliance

− Ensure that the structure on or in which the appliance

is to be installed can bear its weight.

−

Faulty or damaged parts may only be replaced by

original Novy parts.

− The

greater the distance between the appliance and

the hob, the less easily the cooking vapours can be

taken up by the appliance. For this reason, pay heed

to the stated (recommended) installation height.

− In or

der to ensure that the cooking vapours are taken

up in an optimal way, the appliance, or the structure into

which the appliance is being installed, should extend

over the hob. When using your own structure, ensure

that the appliance is installed centred above the hob.

−

For optimal operation, the hob should not be larger

than the appliance or the structure into which the ap-

pliance is installed.



Exhaust or recirculation

Before starting to install, you need to have decided

whether you are making an extraction duct to the outside,

or whether you are going to use the extractor hood as a

recirculation extractor hood. If opting for recirculation,

you will ﬁnd the recirculation kit with the accessories in

these installation instructions.



Install the exhaust duct

For optimum performance of the cooker hood it is im-

portant to pay attention to the following points:

−

The hood has a connection for ﬂat exhaust duct

(89x222mm). If necessary, this can be transferred to

a circular exhaust duct of Ø 150 mm at a later stage.

−

You will achieve the best operation and lowest possible

noise level for the appliance by connecting the extrac-

tion duct by as short a route as possible, with as few

bends as possible and using the prescribed diameter.

−

Use smooth, non-ﬂammable pipes with an internal

diameter that is equal to the external diameter of the

connection nozzle of the hood.

−

Use ﬂat duct with rounded corners and with air de-

ﬂectors. Available at Novy.

−

Do not reduce the exhaust diameter. This will lower

the capacity and raise the noise level.

−

Avoid right-angle bends. Use rounded bends for ef-

fective airﬂow.

− Use of a ﬂexible extraction hose should be kept to a

minimum, and it should only be used for making small

bridging sections, for example as the link between the

outlet nozzle and the extraction duct. Maximally extend

ﬂexible ducts and cut them to size.

−

Ensure that the extraction duct is not crushed and that

there are no kinks in the duct.

− Use a hose clamp or aluminum tape for airtight con-

nections.

− With a horizontal extraction duct, install it at a slight

incline to ensure that condensation does not run back

to the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Novy 6821 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Novy 6821

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info