Bedienungsanleitung Novy 7848 (Seite 16 von 24) (Deutsch, Englisch, Holländisch, Französisch)

741766

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

EN 16

Remove the Monoblock recirculation lter

TheMonoblocklterislocatedonthetopofthehood.

The grille on top of the hood can be opened by pulling it

towardsthewall.TheMonoblocklterislocatedinthe

cutout and you can remove it from there.

Regenerate the Monoblock recirculation lter

• The Monoblock can be regenerated up to 12 times.

This is done in the oven.

• •Placethelterintheovenfor1hourat120°C.Pro-

videsucientfreshairintheroomwheretheoven

has been placed, as smells can be released. Smells

canbereleasedwhenbakingcertainkindsofsh.

In this case it is best to immediately regenerate the

lterintheoven.

Reset the Monoblock recirculation lter

The cooker hood (motor) must be running

Simultaneously press [+] and [–] for 5 sec. until the red

indicatorlampashes3 timesforconrmation.If the

programming is not carried out, the programming is

automatically set after the chimney hood has been

switched on 10 times.

After a reset, the cleaning indication will be set to 200

hours.

Place the Monoblock recirculation lter

ReplacetheMonoblocklteratthetopofthehoodand

close the grille.

Programming en deactivate the recirculation pro-

gram

• Themotormustbeswitchedo.

• Simultaneously press the [+] and the [–] keys on the

hoodfor5secondsuntilthethirdgreenLEDashes

3 times.

4.3 Maintenance of the hood

Pleaseallowthelightstocooldownsucientlybefore

cleaning the hood. Use a soft, wet cloth and a mild

detergent to clean the hood.

Never use aggressive, abrasive detergents or sponges.

Bleach will damage stainless steel.

The stainless steel surfaces can be treated with Novy

Inoxcleaner (906.060) after cleaning.

4.4 Led lighting

Replacing the led lighting

First, remove the power supply from the hood and

allowthelightingtocooldownsuciently.

Opentheglassplateandremovethegreaseltersfrom

the hood. You can reach the 2 LED spotlights at the

bottom of the hood with your hand.

Removing the LED lamp

First disconnect the cable to the LED to be replaced.

Disconnect by means of releasing the lock, by applying

light pressure while at the same time pulling away.

Next, remove the LED to be replaced by making a gen-

tle rotating movement to the left.

Mounting the new LED

Place the new LED light into the locking ring.

Make a rotating movement to the right until the LED

light is locked. Connect the power cable.

4.5 Technical problem

In case of technical problems please contact Novy

Service Department:

• For Belgium: Tel.: 056/36.51.02

• For France: Tel.: 03.20.94.06.62

• For Germany: Tel.: 0511.54.20.771

For all other countries: your local installor or Novy Bel-

gium: +32 (0)56/36.51.02

Please supply us with the model number of your hood.

The model number can be found on the engra-

vedplaquebehindthelter.

You can make a note of the number here:

……………………………

Dimensions: p. 17-19

Electrical scheme: p. 20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Novy 7848 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info