Bedienungsanleitung Nuk Eco Control Audio 500 - 10256438 (Seite 2 von 15) (Englisch)

803241

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

1. Description of device

1.1 Proper use

This baby monitor Eco Control Audio 500

allows you to listen in to your baby or small

child in the nursery. It can also be used for

sound-only monitoring of the elderly.

This device is intended only for dry

environments. It is not suitable for use in

wetrooms or outdoors in wet weather.

This device is intended for use in private

households. It is not intended for

commercial use.

This device is intended as a supplementary

aid. It is in no way a substitute for the

physical presence and attention of parents,

babysitters or carers.

1.2 Description of function

The baby unit 1 is set up in the room that is

to be monitored. It registers the sounds in

the room and sends it wirelessly to the

parent unit 8.

The parent unit 8 has a built-in rechargeable

battery so that you can always set it up

where you can see it. The battery is

recharged using the supplied mains

adapter.

The limiting distance between baby and

parent unit is about 40 m indoors and up to

250 m outdoors (in open country). The

babyphone’s reception will vary depending

on its surroundings. Thick walls or metal can

reduce the range.

The babyphone has an Eco-Mode, in which

the transmitter (baby unit) automatically

switches to standby as soon as your baby is

sleeping peacefully. Depending on the

sensitivity setting, it will not switch back on

until your baby begins making a noise or

starts to cry.

If you want to be sure of hearing every

single sound from the nursery you can use

the VOX 17 button to set the transmission

sensitivity to its maximum (=level 5). On this

setting the baby unit is continually switched

on (see "6.3 Using the VOX function to

adjust the transmission sensitivity" on

page 28).

If you do not want to hear any sounds at all

you can use the Vol - 11 button to set the

volume to mute. In this case only the LED

display 16 will show you if your baby is

making noise.

Activating Eco-Mode minimises the high-

frequency radiation in the children’s room. In

this mode the baby unit merely sends a brief

signal to the parent unit every 30 seconds to

test the connection. If the parent unit is out

of range, the parents will be alerted by a

beep.

You will find more information about Eco-

Mode in "4.5Eco-Mode" on page 26 and in

"6.3Using the VOX function to adjust the

transmission sensitivity" on page 28.

1.3 Approval

The baby monitor operates at a frequency of

2.4 GHz. This device may be used in all EU

countries. In Russia and Ukraine you should

comply with the specific national

restrictions.

1.4 Contents of package

• Baby monitor:

– 1 baby unit (for the nursery)

– 1 mains adapter for the baby unit

– 1 parent unit

– 1 mains adapter for the parent unit

– 1 3.7 V LiPo battery, 1200 mAh

• 1 User Manual

• 1 Quick Start Guide

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nuk Eco Control Audio 500 - 10256438 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nuk Eco Control Audio 500 - 10256438

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info