Bedienungsanleitung Nuk Eco Control Video Display 550VD - 10749102 (Seite 20 von 36) (Englisch)

803238

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

If a setting has already been made, the

active setting will be shown in green. In

addition, all the activated functions are

shown in the status bar at the top of the

screen.

4. Use the 25 or 28 button to move the

star in front of the required setting.

5H, 4H, 3H, 2H, 1H: The timer is

activated and the alarm will be signalled

after the set time.

OFF: the reminder function is off.

5. Press the button 26 to confirm your

setting.

The setting will be stored, the menu will

be closed, and the parent unit will return

directly to monitoring mode.

If activated, the corresponding symbol

will be shown in the status bar (see

"3.3 Overview of status bar indicators"

on page 47).

Note: After 15 seconds without any input

from you, the menu will be closed with the

settings unchanged and the parent unit will

return directly to monitoring mode.

When the set number of hours has

elapsed, an audible alarm is issued

and the corresponding warning

symbol appears in the middle of the screen.

6. To switch the alarm off, press any button.

7. To disable the reminder function before

the alarm:

– follow steps 1 to 5 described above,

select the OFF setting, and then press

the button 26

6.7 Adding and selecting a

camera, and activating

patrol mode

This NUK baby monitor can have up to four

baby units (cameras) connected at the same

time. This allows you to monitor more than

one room, or monitor the same room from

different perspectives. You can either switch

from one camera to the next yourself, or

activate the patrol mode. Patrol mode

automatically switches from one camera to

the next every 10 seconds. First, you will

need to add the cameras to the parent unit.

Additional baby units can be obtained from

www.nuk.de, for example.

Adding a camera

To add a camera/baby unit, proceed as

follows:

1. First make certain the parent unit is near

enough to the new baby unit you wish to

add (within range).

Move to a location that you can be

confident is within range of the baby unit

so that the parent unit can receive the

connection link signal and there are no

communication problems.

2. Make sure the parent unit and the new

baby unit are switched on.

3. Press the button 26.

The menu bar with the main menu will

appear at the bottom of the screen.

4. Use the 24 or 27 button to

select the Camera menu.

The selected symbol will be shown in red.

5. Press the button 26 to view the

submenu.

6. Use the 25 or 28 button to move the

star in front of the required setting.

x : delete camera

+ : add camera

7. To add a camera, use the 25 or

28 button to select the Add

camera submenu.

8. Press the button 26 to view the next

submenu.

An overview appears showing four

camera symbols. The available camera

numbers for your new camera are shown

in black.

Camera numbers already in use are

shown in green.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nuk Eco Control Video Display 550VD - 10749102 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info