Bedienungsanleitung Nuki Smart Lock 3.0 Pro (Seite 11 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

817963

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Operating Instructions

Product description

The Nuki Smart Lock 3.0 Pro motorises

existing door locks and creates a digital

access system when combined with a

smartphone.

The electronic door lock is placed on the

inside of the door on the existing cylinder

with the key inserted. The key is turned by

the Nuki Smart Lock 3.0 Pro motor, but can

also be turned manually using the knob.

The integrated Wi-Fi module can also

establish a connection between the Smart

Lock 3.0 Pro and other Nuki actuators

via the internet. This means Nuki locking

systems can also be accessed online and/or

a connection to other Smart Home products

can be established.

The Nuki Power Pack is a rechargeable

battery pack for the Nuki Smart Lock. The

Nuki Power Pack is charged via a 5 V USB

type C connection. The Power Pack can also

remain permanently connected to the USB

power supply and be recharged this way.

Proper use

We recommend only mounting the Nuki

Smart Lock 3.0 Pro onto lock cylinders with

an emergency function. If the key is inserted

from the inside, these can also be locked and

unlocked from the outside using another key.

Operating temperature: 10–40°C, maximum

humidity 95%, non-condensing. The device

is only suitable for use in dry interior spaces

and must not be installed on ﬁre doors,

escape doors or other doors with special

requirements for door lock drives.

The Wi-Fi connection may fail due to

technical malfunctions, meaning control

functions may be temporarily unavailable

while you’re on the move. Any other use

is deemed improper and shall result in an

exclusion of warranty and liability.

Only certiﬁed 5V USB-C connections may be

used when charging the Nuki Power Pack or

using it with a permanent power supply. The

charger technology is already included in the

Nuki Power Pack.

Assembly and installation

Information on assembly can be found in the

enclosed installation instructions.

To use the adhesive pad (B), the surface

must be cleaned (with residue-free cleaning

agents) and free of any grease.

If your surface is made of materials other

than metal or similarly smooth surfaces,

please contact our customer service.

Safety instructions

The following safety and hazard

instructions not only serve to protect

the device, they also prevent personal

injury. Please read through the instructions

carefully:

• The Nuki Smart Lock 3.0 Pro may fail due

to technical malfunctions and thus be

unable to open the door. Always carry the

key to the lock with you or leave it in an

accessible place so that the door can be

opened manually in the event of an error.

• Improper use of the device might result in

damage.

• Do not expose the device to extreme heat

or cold, direct sunlight, open ﬂames or

other extreme conditions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nuki Smart Lock 3.0 Pro Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info