Bedienungsanleitung Numark 5000FX (Seite 9 von 48) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

23414

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Toggle: Adjusts the rate of the CHOP

effect based upon the BPM 1 setting

Wheel: Moving the wheel clockwise

makes the gaps in the music longer.

Moving the wheel counter-clockwise

makes the gaps in the music shorter.

Display 2: Shows the fractions of the

gap based on beats of the music.

• ECHO

: This creates a repeating echo in

the music. To stop the music and still

hear the echo tail off, flip the input

selector switch. To use this effect,

BPM1 should be set to the current BPM.

Toggle: Adjusts the rate of the echo

based upon the BPM1 setting.

Wheel: Moving the wheel clockwise

inreases the echo time. Moving the wheel

counter-clockwise makes the echo in the

music shorter.

Display 2: Shows the fractions of the beat

of the echo delay time.

• DELAY

: This effect delays the music in time

from the original source. To use this effect,

BPM1 should be set to the current BPM.

Toggle: Adjusts the delay time based upon

the BPM1 setting

Wheel: Moving the wheel clockwise

increases the delay time. Moving the wheel

counter-clockwise makes the delay shorter.

Display 2: Shows the fractions of the beat

of the delay time.

Wet/Dry slider: This fades from source

audio to delayed audio. This effect can be

used to create the same double beat effect

often used by DJs when 2 of the same song

are mixed with the beats offset.

• FILTER

: This effect is used to filter out

frequencies of the audio.

Toggle: Adjusts the point of frequency

removal from 150 (low), vocal (mid), and

high. The toggle alternates between 3

modes: "ISO" for the isolate effect, "kIL"

for the kill effect, and "vOC" for the vocal

kill effect. For ISO, the parameter shows

the deviation of the bandpass center

frequency from mid-range. For kIL, this

parameter indicates the deviation of the

band reject center frequency from mid-

range. For vOC, this parameter indicates

the cutoff frequency of the low-pass filtered

audio added back to the vocal killed audio.

Wheel: Fine tunes the filter frequency.

Display 2: Shows the frequency of the

music eliminated.

• PITCH

(Channel 1- Master Processing

Mode): Adjusts the pitch or Key of the

audio source.

Toggle: Adjusts the pitch by one musical

half-step at a time.

Wheel: Fine tunes the pitch.

Display 2: Shows amount of pitch

adjustment.

• PITCH

(Sampler Processing Mode):

This effect adjusts the pitch and tempo of

the sampler.

Toggle: Selects the type of adjustment

desired.

• SLD is a key-slide effect that

smoothly changes the pitch of the

music without changing the tempo.

• PIT changes both the pitch (key) of

the music and tempo at the same

time.

• LOC changes only the tempo of

the music without changing the

key. This effect is known as

Key Lock.

Wheel: Fine-tunes these adjustments.

Display 1: Shows the BPM of the

sampler

Display 2: Shows the amount of

tempo or key change.

• DISTORT

: This effect creates

distortion from the audio source.

Wheel: Moving the wheel clockwise

increases the effect. Moving the wheel

counter-clockwise decreases the effect.

Toggle: No Function

Display 2: Shows the level of this

effect.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Numark 5000FX Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info