Bedienungsanleitung Numark DM1635 (Seite 15 von 20) (Englisch)

23484

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

DM1635

T8 I hit the Sync Lock button, but the flashing

red beat LED doesn't seem to follow the beat.

This means you hit the Sync Lock button before the red

beat LED actually started tracking the tempo. You can easily

fix this by tapping the Beat Assist buttons as many times as

necessary to resync to the beat of the music.

T9 The beat tracking suddenly gets off track.

This may happen if the music has several beats missing, or

the rhythm suddenly becomes extremely complex or

variable. You can either resync the beat using the Beat

Assist button or wait a few seconds for the Beatkeeper to

automatically recover.

T10 The Beatkeeper seems to track the music for

a little bit right after using the Beat Assist, and

then drifts off.

This could be one of two things:

a) The Beatkeeper is averaging the time between each of

your Beat Assist button taps. If the first tap is way off, the

tempo will be way off.

b) The Beatkeeper was synced during a section of the

music without a well defined beat.

In either case, the problem can be overcome by waiting a

few seconds before preceding to tap the Beat Assist button

two or more times with the beat of the music.

T11 Either the BPM number or red beat LED

doesn't track the music fast enough while using

the pitch bend on my CD player (or speed control

on my record player).

You may have exceeded the tracking capability of the

Beatkeeper. The Beatkeeper can normally handle speed

changes of +/- 5% per beat if the music's rhythm is steady. If

the rhythm is complex (or some of the beats are missing) the

Beatkeeper will require more gradual changes to track

properly.

* If you are using a record player or a wide range pitch bend

on a CD player, note that the Beatkeeper only tracks +/-

11.5% from the tempo at which it was synced. You may

need to resync the Beatkeeper if you exceed this range

while attempting to align tempos.

* You can also manually resync the beat using the Beat

Assist button.

T12 Neither the Tempo Difference graph or the

Beat Offset graph seem to work.

The bar graphs are only operational when both Sync Lock

LEDs are illuminated. This ensures that you don't

inadvertently try to mix two songs without their tempos

being synced.

To make the bar graphs operational, either:

a) Wait for the red beat LED’s to follow the music and tap

the respective Sync Lock button

or b) Tap the Beat Assist button twice with the beat of the

music.

Either method will cause the Sync Lock LED to illuminate.

T13 The Beat Offset graph is not illuminated, but

the Tempo Difference graph is.

This indicates that one or both of the inputs are not

playing. The Beat Offset graph turns off when there are no

beats available for tracking on either or both inputs. The

graph automatically restarts once both inputs become active

again.

T14 The Beat Offset graph has the green LED

illuminated when the red beat LEDs are a half

beat off from each other.

This indicates that the songs are synced at their half beats.

With rap music and some house, mixing is often done on the

half beats rather than the down beats themselves. The

Beatkeeper intentionally syncs this way to give the DJ the

option of beat-to-beat mixing or beat-to-halfbeat mixing.

Numark - The Proven Leader in DJ Technology

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Numark DM1635 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info