Bedienungsanleitung Numark Mixtrack Edge (Seite 5 von 20) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

618133

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

14. Jog Wheel: These wheels serve different functions depending on their current mode:

• Cue Mix Mode: Press the Cue Mix Button to enter this mode. The Jog Wheels will adjust the

Headphone Output's blend between the Main Mix and the Cue Channel (the Decks with the PFL

button lit). Turn a Jog Wheel clockwise to hear more of the Main Mix or counter-clockwise to hear

more of the Cue Channel.

• Browse Mode: With the FX button unlit, press the Browse Button to enter this mode. The Jog

Wheels move through your music library. Turn Deck 1's Jog Wheel to move through your folders

or Deck 2's Jog Wheel to move through your tracks.

• Pitch Fader Mode: With the FX button unlit, press and hold the Pitch Button to enter this mode.

Turn the Jog Wheels to set the pitch adjustment of the tracks on their respective Decks. You can

fine-tune this pitch adjustment by pressing and holding the Shift Button and Pitch Button and

turning the Jog Wheels.

• Pitch Bend Mode: With the FX button unlit, press the Pitch Button to enter this mode. Turn the

Jog Wheels to temporarily bend the pitch of the tracks on their respective Decks.

• Scratch Mode: With the FX button lit, press the Browse Button to enter this mode. Turn the Jog

Wheels to "scratch" with the tracks on their respective Decks.

• Search Mode: With the FX button lit, press the Pitch Button to enter this mode. Turn the Jog

Wheels to scan rapidly through the tracks on their respective Decks.

15. Channel Fader: Adjusts the volume of the Deck.

16. Crossfader: Adjusts the blend between the Decks as heard through the Master Output.

17. Play / Pause: Press this button to play or pause the track. While holding down the Shift Button, press

this button to "stutter" the track, causing it to play immediately from the last Loop In Point, Hot Cue

Point, or point where the track was paused.

18. Cue: If no Hot Cue Point is set, press this button to return to the beginning of the track and pause it.

When a Hot Cue Point is set, press and hold this button to play the track from the last triggered Hot

Cue Point. While holding the Cue Button, you can either (A) press and hold the Play Button and release

both buttons to continue playback or (B) release the Cue Button to return it to the last triggered Hot Cue

Point and pause it.

19. Sync / Keylock: With a track loaded to the Deck, press this button to activate Sync, which

automatically matches the track's tempo/speed to that of the track on the other Deck. Press and hold

this button for 2 seconds to deactivate Sync. While holding down the Shift Button, press this button to

activate or deactivate Keylock, which will lock the track's current pitch adjustment (its key), even if you

adjust its tempo/speed.

20. Hot Cue: These buttons set or trigger Hot Cue points, which are similar to regular Cue Points, except

that each time you press a Hot Cue button, the track will instantly jump to the defined point and begin

playing. To assign a Hot Cue point, press an unlit Hot Cue button where you want to assign it—the

button will illuminate. To delete a Hot Cue Point, press the corresponding Hot Cue Button while holding

down the Shift Button.

21. Loop In / 1/2X: When not in an active loop, press this button to set the Loop In Point. When inside an

active loop, press this button to "stutter" the loop, causing it to play immediately from the Loop In Point.

Press this button while holding down the Shift Button to halve its length.

22. Loop Out / 2X: When not in an active loop, and if there is already a Loop In Point, press this button to

set the Loop Out Point and activate the loop. While inside an active loop, press this button to deactivate

the loop. Press this button while holding down the Shift Button to double its length.

23. Reloop / Smart: When not in an active loop, and if there is already a loop in the track, press this button

to re-activate the loop. While inside an active loop, press this button to deactivate the loop. Press this

button while holding down the Shift Button to activate or deactivate Smart Loops, which will beat-align

an existing (or future) loop.

24. Sample 1, 4 / FX – : Press this button to play the corresponding sample. With the FX button lit, press

this button to select the previous effect for that Deck.

25. Sample 2, 5 / FX + : Press this button to play the corresponding sample. With the FX button lit, press

this button to select the next effect for that Deck.

26. Sample 3, 6 / FX On: Press this button to play the corresponding sample. With the FX button lit, press

this button to activate or deactivate the currently selected effect for that Deck.

27. Treble / FX 1: Turn this knob to adjust the Deck's high frequencies. With the FX button lit, turn this

knob to adjust the selected effect's first parameter (if available).

28. Bass / FX 1: Turn this knob to adjust the Deck's low frequencies. With the FX button lit, turn this knob

to adjust the selected effect's second parameter (if available).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Numark Mixtrack Edge Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info