Bedienungsanleitung Numark NDX900 Controller (Seite 5 von 52) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

618152

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

TOP PANEL FEATURES

1. EJECT – Press this button to

eject the CD. If a CD is

currently playing, this button

will have no effect.

2. USB MASTER – Connect

your USB storage device to

this connector to allow the

NDX900 Controller to read

and play back your music

files. The NDX900 Controller

only supports the MP3 format

so please make sure that your

audio files are encoded as

MP3s if you would like to use

them with the NDX900

Controller.

Note: The NDX900 Controller

supports the HFS+, FAT and

NTFS files systems. HFS+

GUID Partition Table is not

supported at this time.

3. SOURCE – Press the

SOURCE button and turn the

PARAMETER knob to choose

which audio source you want

to play; CD, USB, or you can

use the NDX900 Controller as

a USB MIDI controller. This

button will not function if the

NDX900 Controller is

currently playing.

4. TRACK KNOB – Used to skip

from track to track, for folder

navigation and as an "enter"

button.

5. BACK – When navigating a CD or device with folders, this button will take you back to folder navigation or file

navigation.

6. PLAY – Starts the music. The music will begin playing from either the cue point or the last point of pause. Pressing this

button while the unit is playing will restart the song from the last set cue point, which can be used to create a "stutter"

effect.

7. PAUSE – Stops the music while in play. Pressing play following this sets a new cue point. Holding down the button

while scratching or stuttering the music will stop the music at the current position, allowing you to capture a loop in or

cue point.

8. CUE – Returns and pauses the music at the last set cue point. The cue point is the last place in which the unit was

paused and then play was pressed. Pressing a second time allows for temporary play of this point. You can easily edit

the cue point by turning the wheel. As you rotate the wheel the music will sound. By stopping the wheel and pressing

play a new point is set.

9. JOG WHEEL – The jog wheel serves many functions depending on its current mode.

a) If a track is not playing, the JOG WHEEL will search slowly through a track's frames. To set a new cue point,

rotate the JOG WHEEL then begin playback when you have determined the proper position. Press CUE to return

to that cue point.

b) If a track is playing, the JOG WHEEL will temporarily bend the pitch of the track. Rotating the JOG WHEEL

clockwise temporarily speeds it up while rotating it counterclockwise slows it down. This is a useful tool for beat-

matching.

c) When the SEARCH button has been activated, rotating the JOG WHEEL will scan rapidly through the track.

d) When the SCRATCH button has been activated, rotating the JOG WHEEL will "scratch" over the audio of the

track, like a needle on a record.

10. SCRATCH – Turns scratch mode on or off. If scratch mode is on, the button will light up and the center part of the jog

wheel will scratch like a turntable when you spin it. If scratch mode is off, the center part of the jog wheel will pitch bend

when you spin it.

To change the scratch mode or style, hold down SCRATCH and turn the PARAMETER knob.

11. SEARCH – When engaged, search mode will allow you to use the jog wheel to quickly scan through the current track. If

you do not touch the wheel for 10 seconds you will automatically exit search mode. Search speed can be adjusted by

holding the SEARCH button and turning the PARAMETER knob.

To adjust how quickly SEARCH scans through your tracks, hold down SEARCH and turn the PARAMETER knob.

12. STOP / START TIME – Use these knobs to adjust the speed that the music starts when you press play (START TIME)

or the speed that the music stops when you press pause (STOP TIME).

13. TAP – Pressing this button in time with the beat will help the built-in BPM counter detect the proper tempo. Holding the

button for 2 seconds will cause the BPM counter to reset and recalculate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Numark NDX900 Controller Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info