Bedienungsanleitung Numark Orbit (Seite 4 von 24) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

618136

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Features

Top View Bottom View

All of Orbit's controls are MIDI-mappable, so they can control any MIDI-assignable command in your

software, giving you countless performance possibilities. Below are descriptions of the controls' general

behavior. To download pre-made control mappings for your software—and an editor to create your own

mappings—visit www.numark.com/orbit.

1. Pads: These 16 multicolor pads control various software commands as assigned in the MIDI mapping.

Switch between the 4 banks (of 16 pads each) with the Pad Bank Selectors.

You can assign different colors to these pads, as well. For more information, see the Color

Customization section of this manual.

Note: The pads labeled "a," "b," and "c" in the above diagram are used for customizing the

colors of Orbit's pad lights and for pairing Orbit to the wireless USB receiver. See the Color

Customization and Wireless Usage sections of this manual for more information.

2. Pad Bank Selectors (1, 2, 3, 4): Use these buttons to switch between the 4 banks of Pads. The

current Pad Bank Selector will light up.

The current Pad Bank Selector will flash to indicate Orbit's battery is low. When this happens, connect

Orbit's mini-USB port to your computer with a mini-USB cable.

3. Virtual Knob: This wheel adjusts various software features as assigned in the MIDI mapping. Switch

between the 4 functions with the Virtual Knob Selectors.

4. Virtual Knob Selectors (K1, K2, K3, K4): Use these buttons to switch between the 4 functions of the

Virtual Knobs:

• K1, K2, and K3: The Virtual Knob acts as a 270° knob—ideal for mapping to knobs controlling

filters, EQs, effects parameters, etc.).

• K4: The Virtual Knob acts as a 360° encoder for scrolling through your music library or acting as

a virtual platter (so you can search through the current track, scratch, or pitch-bend).

5. Shoulder Buttons: Hold down either or both of these buttons to activate Orbit's accelerometer, and

then tilt Orbit to affect it. The left shoulder button activates the accelerometer on the left-right axis. The

right shoulder button activates the accelerometer on the forward-back axis. The Pad LEDs will "stream"

in the directions it detects, and the streams will get faster as the tilt increases.

Tip: You can "latch" a shoulder button in the "on" position by double-pressing it. Return it to its

default "momentary" behavior by pressing it once.

6. Hooks: Attach a lanyard to these hooks to hang Orbit from your neck.

7. Strap Attachment: Unscrew the strap attachment and loop Orbit over an armband or belt, and then re-

tighten the strap attachment.

Charging LED: This light will turn on when Orbit's internal lithium-ion battery is charging and turn off

when it is fully charged. See the Charging and Power Usage section of this manual for more

information about charging Orbit.

9. Mini-USB Port: Use the mini-USB cable to connect this port to a USB port on your computer. This

connection charges Orbit's internal lithium-ion battery (whether Orbit is powered on or not). It also

allows you to use Orbit "wired" instead of wirelessly.

10. Power Switch: Flip this switch to power Orbit on or off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Numark Orbit Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info