Bedienungsanleitung Numark PT01 Touring turntable (Seite 3 von 28) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

618181

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Features

1. Platter – Place your record here.

2. 45 RPM Adapter Holder – Holds the

included 45 RPM adapter. When not

using the adapter, please place it in

this holder.

3. Tonearm – The fixed tonearm can be

raised and lowered by hand, or by

pressing the raise / lower lever.

4. Arm Clip – This specially designed arm

clip secures the tonearm while at rest

or when not in use. The arm clip has

been designed to remain in the up

position while unlocked.

5. Raise / Lower Lever – Raises and

lowers the tonearm.

6. 33 / 45 / 78 Switch – This switch

controls the RPM of the turntable platter.

Note: For best results when playing 78 RPM vinyl

records, use a 78 stylus (sold separately). Only use a

78 stylus with 78 RPM vinyl records.

7. Autostop switch – This switch turns autostop on or

off. When autostop is on, the platter will start spinning

when the tonearm is placed over the record and stop

spinning when the record has reached the end. (When

autostop is off, the platter will always spin regardless of

the position of the tonearm.)

Note: If your vinyl record stops before it reaches the

end of the music, turn Autostop to the off position for

this particular record. This is generally recommended

for 45 RPM records.

8. Volume/Power Knob – To power on PT01 Touring,

turn this knob clockwise until it clicks. When powered on, use

this knob to adjust the volume. To turn off PT01 Touring, turn

this knob counterclockwise until it clicks.

9. Headphone Output – Connect headphones here (sold

separately) to listen to your vinyl.

10. Battery Charging Indicator – The LED will illuminate when

charging the battery. The LED will turn off once the battery is

fully charged.

11. Power Indicator – This LED illuminates when the power is on and goes out when the battery power is

depleted.

12. Speaker – The record's audio will be played through this built-in speaker.

13. Aux Input – Connect a CD player, digital media player, or other audio source to this 1/8” stereo

auxiliary input.

14. RCA Output* – The audio from a playing vinyl record is sent to this line-level coaxial audio output. This

must not be connected to phono level devices.

15. USB Port – Use the included USB cable to connect your turntable to your computer. The USB

connection will send audio from the turntable to your computer. Please see the Using PT01 Touring

With Your Computer section of this manual for information. Also, use the included USB cable to

connect PT01 Touring to a USB power adapter connected to a power outlet or your computer.

IMPORTANT: Remove the plastic cartridge

cover (needle cover) before operating the

turntable.

*WARNING: The RCA outputs are LINE

level. Please only connect these to LINE

level inputs. You may damage your receiver

if you plug in a LINE level device into a

PHONO level input.

IMPORTANT: Place the included felt slipmat

on the platter; then place your record on the

felt slipmat to carefully hold your records.

AUX

USB

OUT

TOURING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Numark PT01 Touring turntable Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info