233447 06/11 (A09)
21
Warning:
It is essential that this equipment is correctly assembled and operated in accordance with current safety regula-
tions.
When using the equipment always ensure that all necessary precautions are taken to guarantee the safety of
the operator and any other persons who may be affected.
Wear non-slip footwear when scrubbing. Use a respiratory mask in dusty environments.
The machine, while charging, must be positioned so that the mains plug is easily accessible.
When cleaning, servicing or maintaining the machine, replacing parts or converting to another function the power
source shall be switched off.
Mains operated machines shall be disconnected by removing the power plug, and battery operated machines
shall be disconnected by removing the isolating pin.
In order to prevent unauthorised use of the machine the power key must be removed after use.
Machines left unattended shall be secured against unintentional movement.
Operators shall be adequately instructed as to the correct use of the machine.
NOISE AND VIBRATION
Sound Level in use (L ) < 78 dB(A)
The operators arms are subject to a vibration level of <2.5m/s when using the
Machine.
NOTE:
In some applications, noise or vibration levels may exceed the gures stated. If
Noise levels exceed 85dB(A) appropriate ear protection must be used.
PRECAUTIONS WHEN WORKING WITH BATTERIES
1. Always wear protective clothing e.g. face visor, gloves and overalls when working with batteries
2. Whenever possible always use a properly designated and well-ventilated area for charging. Do not smoke or
bring naked ames into the charging area.
3. Remove any metallic items from hands, wrists and neck i.e. rings, chains etc. before working on a battery.
4. Never rest tools or metallic objects on top of the battery.
5. When charging is complete disconnect from the mains supply.
6. The batteries must be removed from the machine before it is scrapped.
7. The machine must be disconnected from the supply when removing the battery.
8. To remove the batteries:- Disconnect machine from the mains supply (if charging) and ensure batteries are
switched off with circuit disconnect switch (see page 7). Disconnect hoses from separator and tanks.
Remove separator and tanks . Unscrew battery strap xings and remove.
Undo battery terminals and remove. Remove batteries.
9. The batteries are to be disposed of safely and in accordance with the battery directive.
10. Only use genuine NUMATIC replacement batteries.
11. Do not allow the batteries to become fully discharged; it may not be possible to recharge them. Batteries
should not be discharged below 9.5 volts with 10 amps owing.
12.Do not allow one battery to be discharged separately to the other.
13.Do not mix batteries from different machines.
14. The batteries tted to this product are Valve Regulated Lead Acid (VRLA) gel electrolyte type. The tting of
any other type of battery may cause a safety hazard.
BATTERY CARE
1. Always recharge the batteries after use. This can be done at any time –it
s not necessary to wait until they are fully discharged; they do not develop a “memory”.
2. Leaving the charger to operate for a minimum of 4 hours after the green
light has come on, at least weekly, will prolong battery life. 3. Do not store the machine with the batteries
discharged.
Note:
This appliance is not intended for use by persons (including children) with reduced physical sensory or mental
capabilities, or lack of experience and knowledge.
Unless they have been given supervision or instruction concerning the use of the appliance by a person
responsible for their safety.
