GB
15
1. Description
1. Release button
2. Handle
3. On/Off switch for
mitre box saw mode
4. On/Off switch for
bench-type circular saw mode
5. Saw blade
6. Saw blade guard, hinged
7. Stop rail
8. Rotary table
9. Lower saw table
10. Lock screw for turntable
11. Scale
12. Table insert, bottom
13. Saw blade fixture
14. Lower saw blade cover
15. Locking nut
16. Saw table
17. Upper saw blade guard
18. Parallel stop
19. Hexagon wrench
20. Workpiece supports
21. Face wrench
22. Clamping screw
23. Retaining pin
24. Locking fork
25. Knurled screw for miter settings
26. Knurled screw
27. Stop rail
28. Lock screw for cutting width
29. Push stick
30. Splitter
31. Extractor socket
32. Allen screw
33. Recessed head screw
34. Table insert, top
35. Outer flange
36. Lock screw for workpiece support
2. Items supplied
� Cross cut and miter box saw with upper table
� Carbide-tipped saw blade
� Cross/parallel stop
� Push stick
� Workpiece support
� Face wrench, hexagon wrench
3. Proper use
The KGST 210/1 circular cross-cut and mitre box
saw with upper table is designed for making cross
cuts, longitudinal cuts and mitre cuts (using the
stops) in timber and plastic commensurate with the
machine’s size. It is not suitable for cutting fire wood.
A special jig is required to cut roundwood.
The machine is to be used only for its prescribed
purpose.
Any use other than that mentioned is considered to
be a case of misuse. The user/operator and not the
manufacturer shall be liable for any damage or injury
resulting from such cases of misuse. The machine is
to be operated only with suitable saw blades. It is
prohibited to use any type of cutting-off wheel.
To use the machine properly you must also observe
the safety regulations, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the machine have
to be acquainted with this manual and must be
informed about its potential hazards.
It is also imperative to observe the accident
prevention regulations in force in your area. The
same applies for the general rules of occupational
health and safety.
The manufacturer shall not be liable for any changes
made to the machine nor for any damage resulting
from such changes.
Even when the machine is used as prescribed it is
still impossible to eliminate certain residual risk
factors. The following hazards may arise in
connection with the machine’s construction and
design:
� Contact with the saw blade in the uncovered saw
zone.
� Reaching into the running saw blade (cut
injuries).
� Kick-back of workpieces and parts of workpieces
due to improper handling.
� Saw blade fracturing.
� Catapulting of faulty carbide tips from the saw
blade.
� Damage to hearing if essential ear-muffs are not
worn.
� Harmful emissions of wood dust when the
machine is used in closed rooms.
4. Important notes
Please read this manual carefully and pay attention
to the information provided. Use this manual to
familiarize yourself with the machine, its correct use
and safety regulations.
� Safety regulations
� Important: Whenever you use electric tools it is
imperative to take basic safety precautions in
order to reduce the risk of fire, electric shock and
personal injury. Essential safety precautions
include:
Anleitung KGST 210/1 19.09.2002 18:49 Uhr Seite 15
